Status Monitor

This item is displayed in the Overview screen or in the Home screen.

• Error Information/Notification

  Check information on errors occurring with the printer. Remedy the situation according to the error information.

  • List of Error Messages
  • List of Error Codes

• Ink Information

  Check the ink level in the ink tanks and their model numbers.

  • Checking Ink Level
  • Checking the Ink Tank Model Number

• Maintenance Cartridge Information

  Check on replacement of the maintenance cartridge and its remaining capacity.

  • Replacing the Maintenance Cartridge
  • Checking the Remaining Maintenance Cartridge Capacity

• Device Information

  Check information on the printer's total number of pages and on the device itself.

  • Version Information

    Check version information for the printer's firmware.

  • Usage

    Displays the actual printer usage, such as the total print area.

  • Print Head Information

    Displays the Print head serial number, elapsed days since the current Print head was installed, and dot count.

  • Print Head Alignment Log

    Displays the Print head alignment performance log (up to 5).

  • Automatically Applied Values

    Displays the head height and the vacuum strength of the transport portion in the last print job.

  • Serial Number

    The printer's serial number is displayed.

• Copy/Print Job

  Check processing and logs for printing and copying.

  • Checking the Print Job Status and Log
  • Checking the Copy Job Status and Log

• Pause Printing

  Set whether to pause printing.

  • Pausing Printing

• TX Job

  Check the send/save job status and log for scans.

  • Checking the Send and Save Status and Log of Scanned Data

• Network Information

  Check the printer's network information.

  • IPv4

    Check settings such as the IPv4 address.

    • IPv4 Settings

  • IPv6

    Check settings such as the IPv6 address.

    • IPv6 Settings

  • Network Connection Method

    Check if the printer connection is wired or wireless. If the connection is via wireless LAN, you can also check communication status and error information.

    • Wi-Fi Settings

  • Direct Connection Information

    You can check the connection, etc. when using Direct Connection.

    • Direct Connection Settings

  • IEEE 802.1X Error Information

    You can check error information when an error occurs with IEEE 802.1X authentication.

• Rmv. Mem. Media

  Appears when a USB flash drive is connected. Press to remove the USB flash drive.

• IP Address

  With initial settings, the printer's IPv4 address appears. You can also set this not to be displayed.

  • Display IP Address