skip to main text

Copying Two Pages onto Single Page

You can copy two original pages onto a single sheet of paper by reducing each image.

  1. Load paper.

  2. Loading Originals on Document Platen.

  3. Select Copy on the HOME screen.

    Note

    • If both roll paper and cut sheet are loaded, a screen will appear asking which one to use. Select Copy to cut sheet.

  4. Select Layout copy.

  5. Select Settings.

  6. Select 2-on-1 copy in Layout.

  7. Select Advanced.

    Specify the orientation and order of originals.

    • When you select Orientation: Portrait and Left to right:

    • When you select Orientation: Portrait and Right to left:

    • When you select Orientation: Landscape and Top to bottom:

    • When you select Orientation: Landscape and Bottom to top:

  8. Select whether or not to show the preview screen.

    If you select ON, the preview screen is displayed so that you can check the orientation and order of the originals.

  9. Select OK.

  10. On the Copy standby screen, specify settings as necessary.

    • A: The size and type of the loaded paper.

    • B: Specify the number of copies.

      Select the numbers to specify the number of copies.

    • C: The copy layout.

    • D: Display the print setting items.

      For more on the setting items:

  11. Press the Black button or the Color button.

    When the first sheet of the original has been scanned, the following screen is displayed.

    • A: Select to rotate the original by 180 degrees.

    • B: Select to start scanning the original.

    • C: Select to rescan the original.

  12. Check the preview screen and select Scan.

    The screen below appears after scanning the first sheet of original.

    • D: Select to start scanning the original.

    • E: Select to start copying the original already scanned.

  13. Load the second sheet of the original on the platen and select Scan.

  14. Check the preview screen and select Scan.

    The printer starts scanning the second sheet of original and copying.

Note

  • If Cannot process because device memory is full. appears on the touch screen when scanning, set Print qlty to Standard and try copying again. If the problem is not resolved when Media type is set to Plain paper, set Print qlty to Draft and try copying again.

  • To cancel copying, press the Stop button.

  • You can add the copying job while printing.