skip to main text

Making Copies

This section describes the basic procedure to perform standard copying.

  1. Load paper.

  2. Loading originals on document platen.

  3. Select Copy on the HOME screen.

    Note

    • If both roll paper and cut sheet are loaded, a screen will appear asking which one to use. Select Copy to cut sheet.

  4. Select Standard copy.

  5. On the Copy standby screen, specify settings as necessary.

    • A: The size and type of the loaded paper.

    • B: Specify the number of copies.

      Select the numbers to specify the number of copies.

    • C: The copy layout.

    • D: Display the print setting items.

      For more on the setting items:

  6. Press the Black button or the Color button.

    Important

    • Do not open the document cover or remove the original from the platen until scanning is completed.

Note

  • To cancel copying, press the Stop button.

Adding Copying Job (Reserve copy)

If you load the original on the platen, you can add the copying job while printing (Reserve copy).

The screen below is displayed when you can add the copying job.

Load the original on the platen and select the same button (Black button or Color button) as the one which you previously pressed.

Important

  • When you load the original on the platen, move the document cover gently.

Note

  • When Print qlty (print quality) is set High, you cannot add the copying job.

  • When you add the copying job, the number of copies or the settings such as the page size or media type cannot be changed.

  • If you press Stop button while reserve copying is in progress, the screen to select the method to cancel copying is displayed. If you select Cancel all reservations, you can cancel copying all scanned data. If you select Cancel the last reservation, you can cancel the last copying job.

  • If you set a document of too many pages to add the copying job, Cannot add more copy jobs. Please wait a while and redo the operation. may appear on the touch screen. Select OK and wait a while, and then try copying again.

  • If Failed to reserve the copy job. Start over from the beginning. appears on the touch screen when scanning, select OK and press Stop button to cancel copying. After that, copy the documents that have not been finished copying.