skip to main text

The length of the printed image in the paper ejection direction is not accurate

  1. Check 1 Is the media type specified in the printer driver the same as the media type loaded in the printer?

    When printing with the media type specified in the printer driver, load the specified media type in the printer.

    When printing with the media type specified in the printer driver, load the specified media type in the printer.

    1. To stop printing, tap Stop.

    2. Change the paper type in the printer driver and try printing again.

    Note

    • When Auto (Use Printer Settings) is selected for the media type, printing is performed with the media type loaded in the printer.

    • Click Get Information to reflect the paper information set in the printer to the printer driver.

  2. Check 2 When loading paper in the printer, is the media loaded the same as the media type selected on the touch screen?

    Select the correct media type in the touch screen menu when loading paper in the printer.

  3. Check 3 Perform print quality adjustment to automatically adjust the feed amount.

    Perform Adjust print quality from Paper feed adjustment and Print alignment pattern to automatically adjust the feed amount.

  4. Check 4 Is Set priority for Paper feed adjustment in the touch screen menu set to Prioritize print quality?

    Set Set priority for Paper feed adjustment to Prioritize length accuracy, and then carry out Adjust feed length.