skip to main text

Automatic Banding Adjustment

If printed images are affected by banding in different colors across the sheet, execute Adjust print quality for automatic adjustment of the paper feed amount.

The printer prints and reads a test pattern for automatic adjustment of the feed amount.

Important

Note

  • We recommend executing the adjustment if you have changed the paper type or paper size.
  • Always check the Set priority values.

  • If additional fine-tuning is necessary, execute Paper feed fine adjustment.

  • Use Adjust feed length to ensure that lines in CAD drawings are printed at exactly the right length.

  • This may take some time, depending on the type of paper.

Adjusting Feed Amount (Top)

Items to Prepare

When Using Rolls An unused roll at least 254.0 mm (10.00 in) wide

Follow the procedure below to adjust.

  1. Load paper.

  2. Flick HOME screen and tap Maintenance.

  3. Tap Paper feed adjustment.

  4. Tap Adjust print quality (top).

  5. Tap Auto.

  6. Tap paper to adjust.

    A test pattern is printed for adjustment and adjustment is finished.

Adjusting Feed Amount (Front)

Items to Prepare

When Using Rolls An unused roll at least 254.0 mm (10.00 in) wide
When Using Sheets One sheet of unused paper of at least A4/Letter size

Follow the procedure below to adjust.

  1. Load paper.

  2. Flick HOME screen and tap Maintenance.

  3. Tap Paper feed adjustment.

  4. Tap Adjust print quality (front).

  5. Tap Auto.

  6. Tap paper to adjust.

    A test pattern is printed for adjustment and adjustment is finished.