Maintenance
This item is displayed by selecting (Setup) on the HOME screen.
-
Nozzle Check
Prints out the nozzle check pattern.
-
Print Head Cleaning
Select this to clean the print head.
-
Print Head Alignment
Adjusts the alignment of print head.
-
Print head angle adjustment
Adjusts the print head angle.
-
Paper feed adjustment
Sets the paper feed amount.
-
Set priority
Sets the method of adjusting the paper feed amount.
-
Auto
Prioritize print quality or Prioritize length accuracy is automatically selected depending on the settings in the printer driver selected for printing.
-
Prioritize print quality
Adjusts the print quality to make the horizontal streaks of the print less noticeable. The setting for Adjust print quality is applied. When Paper feed fine adjustment is executed, the setting for Paper feed fine adjustment is applied in addition to the setting for Adjust print quality.
-
Prioritize length accuracy
Adjusts the length of the ruled lines on the printed piece to match. The values for Change adjustment values under Adjust feed length are applied.
-
-
Adjust print quality
Select this when the printed material has different colored horizontal streaks.
-
Adjust feed length
Select this to print the exact length of the ruled lines in a CAD drawing.
-
-
Color calibration
Select this to perform the color calibration or check the adjustment information.
-
Maintenance cartridge info
Displays the estimated usage of maintenance cartridge. Select Replace to replace the maintenance cartridge.
-
Head Replacement
Select this to replace the print head.
-
Replace cutter blade unit
Select this to replace the cutter blade.
-
Platen cleaning
Select this to clean inside the top cover.
-
Prepare to move
Select this to prepare for transporting the printer.