The back side of the paper is dirty

1. Check 1 Was the previous print job borderless, or printed on small paper?

   Open the top cover and clean the platen.

   • Cleaning Inside the Top Cover

2. Check 2 Is Detect paper width in the touch screen menu set to Disable?

   Printing with Detect paper width set to Disable may cause the platen to be dirtied.

   Set Detect paper width in the touch screen menu to Enable, and then open the top cover and clean the platen.

   To continue printing with Detect paper width set to Disable, first open the top cover and clean the platen, and then manually feed roll paper over the platen when printing.

   • Cleaning Inside the Top Cover
   • Feeding Roll Paper Manually

3. Check 3 Paper may be gripped weakly over the platen.

   Set a higher Transport unit vacuum strength in the touch screen menu.

   • Adjusting Vacuum Strength

4. Check 4 Is Extension for borderless printing set to a large value?

   The platen may become dirtied by setting a large amount of extension.

   Reduce the value of Extension for borderless printing.

   • Specifying the Amount of Extension for Borderless Printing

5. Check 5 If using plain papers, is the media type set to Plain papers?

   Set the media type to PlainP(Instant-dry) for improved quick-drying.

   • Changing the Type of Paper

6. Check 6 Does this paper take longer to dry?

   Increase the length of the Pause between pages and Pause between scans settings from the touch screen menu.

   • Specifying the Ink Drying Time

   If the platen is dirty, open the top cover and clean the platen.

   • Cleaning Inside the Top Cover

   Note

   • When printing on paper that takes longer to dry, the paper may curl during printing and come in contact with the output tray.

     In such situations, set an Ink drying wait time and an Ink drying target area for Pause between scans in the touch screen menu.

     However, note that printing will now take longer.

   • In a hot and humid environment, rolling paper printed with images containing areas of saturated color may transfer ink to the contact surface, affecting print quality.

     Move the printer to a different environment, or let the paper dry before rolling it.

7. Check 7 Does the paper loaded on the printer match the media type selected in the printer driver?

   The platen may become dirty if the loaded paper does not match the settings. We recommend that you clean the platen before printing again.

   • Cleaning Inside the Top Cover

   When printing with the media type specified in the printer driver, load the specified media type in the printer.

   • Loading Rolls in the Printer
   • Loading Sheets in the Printer

   When printing with the media type loaded in the printer, specify the media type in the printer driver.

   • Printing with Easy Setup (Windows)
   • Printing with Easy Setup (macOS)

   Note

   • When Auto (Use Printer Settings) is selected for the media type, printing is performed with the media type loaded in the printer.

   • Click Get Information to reflect the paper information set in the printer to the printer driver.

8. Check 8 Does the paper type selected in the printer driver or on the touch screen match the actual paper type loaded?

   The platen may become dirty if the loaded paper does not match the settings. We recommend that you clean the platen before printing again.

   • Cleaning Inside the Top Cover

   Set the correct paper type on the touch screen.

   • Changing the Type of Paper

9. Check 9 Dirt may be removed by letting a blank sheet of paper pass through.

   Perform a paper feed from the touch screen.

   • Feeding Roll Paper Manually