skip to main text

IJ Network Device Setup Utility Screen

Items on IJ Network Device Setup Utility Screen

The screen below appears when you start up IJ Network Device Setup Utility. Detected printers are listed on the screen and the items below are shown.

figure: IJ Network Device Setup Utility screen

  1. Product Name

    Displays the product name of detected printer. The icon below appears on the left if the printer cannot be used.

    : Appears when the printer has not been connected or configured.

    : Appears when the IP address is duplicated to another printer.

    : Appears when you cannot communicate with the printer.

    Note

  2. Serial Number (Last 5 Digits)

    Displays the last five digits of printer's serial number.

  3. Status

    Displays the printer status as shown below.

    Available
    Indicates the printer is available.
    Setup Completed
    Appears after performing network setup and clicking Set to close the window.
    Not Connected
    Indicates the printer is required to perform wireless LAN setup.
    Not Set
    Indicates the printer cannot be used on network, or IPv6 is disabled. Specify an IP address or enable IPv6 on Network Settings....
    IP Address Overlap
    Indicates the IP address is duplicated to another printer.
    Unknown
    Indicates the printer recognized as Available in the past cannot be used currently.

    Note

    • If USB is selected from the pulldown menu on the toolbar, nothing is displayed.

  4. IP Address

    Displays the printer IP address. Nothing is displayed if the printer status is Not Connected.

    Note

    • If USB is selected from the pulldown menu on the toolbar, "-" is displayed for the interface (wireless/wired LAN) disabled on the printer setting.

  5. Location

    Displays the printer location if it is registered. Nothing is displayed if the printer status is Not Connected.

    Note

    • If USB is selected from the pulldown menu on the toolbar, nothing is displayed.

  6. Connection Method

    Displays printer connection method (wired or wireless LAN).

    Note

    • If USB is selected from the pulldown menu on the toolbar, either of the LAN connection method (wired or wireless) available for the printer is displayed.
    • If the printer supports both of the LAN connection methods, the printer is recognized as two printers and they are displayed separately.
    • If the printer does not support wired LAN, wired LAN is not displayed.
    • If you are using IJ Network Device Setup Utility on the computer which does not support wireless LAN, wireless LAN is not displayed.

  7. Setting Method

    Displays printer setting method.

    • Auto

      Appears if the printer is used by IP address specified automatically.

    • Manual

      Appears if the printer is used by IP address specified manually.

    Note

    • If USB is selected from the pulldown menu on the toolbar, "-" is displayed for the interface (wireless/wired LAN) disabled on the printer setting.

  8. MAC Address

    Displays the MAC address of the detected printer.

    Note

    • If USB is selected from the pulldown menu on the toolbar, "-" is displayed for the interface (wireless/wired LAN) disabled on the printer setting.

  9. Device Name

    Displays the printer device name if it is registered.

    Note

    • If USB is selected from the pulldown menu on the toolbar, nothing is displayed.

  10. IPv6

    On appears when an IPv6 address is assigned for the printer.

    Note

    • If USB is selected from the pulldown menu on the toolbar, "-" is displayed.

  11. Displays the printer status and operation guides.

    Selecting a printer from the printer list displays its current status and what to do next.

Menus on IJ Network Device Setup Utility Screen

This section describes menus on IJ Network Device Setup Utility screen.

figure: IJ Network Device Setup Utility screen

  1. Printer Settings menu

  2. View menu

  3. Option menu

  4. Help menu

Items on IJ Network Device Setup Utility Screen Toolbar

This section describes items on IJ Network Device Setup Utility Screen toolbar.

figure: IJ Network Device Setup Utility screen

  1. Perform wired or wireless LAN setup.

    Note

  2. Redetects printers.

    Note

    • This item has the same function as Update in the View menu.

  3. Stops detecting printers.

    Note

    • This item has the same function as Cancel in the View menu.

  4. Switches the printer list. (IPv4, IPv6, or USB printers)

    Note

    • This item has the same function as Switch View in the View menu.
    • You can also display the USB connected printer list. (Not available for some models.) In this case, select USB.

  5. Displays this guide.

    Note

    • This item has the same function as Online Manual in the Help menu.