Paper is not cut

1. Check 1 Is Automatic Cutting in the printer driver set to No or Print Cut Guideline?

   Set the printer driver Automatic Cutting setting to Yes.

   • Page Setup Tab Description (Windows)
   • Paper Detailed Settings (macOS)

2. Check 2 Is Cutting mode in the touch screen menu set to Eject cut or User cut?

   If Cutting mode is set to Eject cut, select Feed/cut in the touch screen menu and cut the paper.

   If Cutting mode is set to User cut, cut the roll paper with a cutting implement such as scissors.

   • Specifying the Cutting Method for Rolls

3. Check 3 Is the cutter blade attached?

   Attach the cutter blade.

   • Replacing the Cutter Blade

4. Check 4 Is the cutting method for paper ejected after printing set to Do not cut when the roll unit is set to Take-up mode?

   Follow the steps below to change the settings.

   1. Select the roll unit on the touch screen.

   2. Select Use in take-up mode, and then select Use the cutting mode setting.

   3. Set the Cutting mode for Roll paper 1 on the touch screen to Automatic cut.