BT008W

Preparation

In order to print via Bluetooth communication with Windows, the following system requirements must be satisfied.

In order to connect the Bluetooth unit and print via Bluetooth communication, the following steps are required.

  1. Check that the Bluetooth unit is properly attached to the printer.

    See Attaching to and Removing from the Printer.

  2. Install the MP Drivers.

    See Installing the MP Drivers.

  3. Check the device name of the printer using the LCD.

    See Checking the Device Name of the Printer.

  4. Register the printer for Bluetooth printing.

    • When using Windows 7, and when Add a Bluetooth Device is displayed in Hardware and Sound under Control Panel

      Authenticate the printer as a Bluetooth device on Add a Bluetooth Device in Hardware and Sound under Control Panel.

      See Registering the Printer.

    • When using Windows Vista, and when Bluetooth Devices is displayed in Hardware and Sound under Control Panel

      Authenticate the printer as a Bluetooth device on Bluetooth Devices in Hardware and Sound under Control Panel.

      See Registering the Printer.

    • When using Windows XP SP2 or later, and when Bluetooth Devices is displayed in Printers and Other Hardware under Control Panel

      Authenticate the printer as a Bluetooth device on Bluetooth Devices in Printers and Other Hardware under Control Panel.

      See Registering the Printer.

    • The operations may vary depending on your operating program. In this case, refer to your computer's operation manual.

Page top