Attaching the Bluetooth Unit to the Printer
Removing the Bluetooth Unit from the Printer
Attach the Bluetooth unit to the USB flash drive port of the printer in accordance with the following procedure.
Refer to Front View for the position of the USB flash drive port.
Make sure that the printer is turned on.
Insert the Bluetooth unit to the USB flash drive port of the printer.
Detach the cap from the Bluetooth unit. Store the cap in a safe location.
NoteWhen the Bluetooth unit is properly attached to the printer, the message is displayed on the LCD.
Remove the Bluetooth unit from the USB flash drive port of the printer in accordance with the following procedure.
Remove the Bluetooth unit from the USB flash drive port of the printer.
ImportantMake sure that the lamp on the Bluetooth unit is neither lit nor flashing before you remove the Bluetooth unit.
ImportantStore the Bluetooth unit with the cap attached.
Page top |
