Setting Items for Copying
The following screen is displayed by pressing the right Function button on the Copy standby screen.
Use the 
button to change the setting item and use the 
button to change the setting.
Note
-
Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, Error details is displayed on the LCD. In this case, press the left Function button to confirm the message, then change the setting.
-
The settings of the page size, media type, etc. are retained even if the machine is turned off.
-
When copying starts in the copy menu that is not available with the specified setting, The specified function is not available with current settings. is displayed on the LCD. Change the setting, following the on-screen instructions.
-
Magnif. (Magnification)
Specify the reduction/enlargement method.
-
Intensity
Specify the intensity. When Auto is selected, the intensity is adjusted automatically according to the originals loaded on the platen glass. Auto is displayed on the Copy standby screen.
Note-
When Auto is selected, load the original on the platen glass.
-
-
Page size
Select the page size of the loaded paper.
-
Type (Media type)
-
Print qlty (Print quality)
Adjust print quality according to the original.
Important-
If you use Standard with Type set to Plain paper and the quality is not as good as expected, select High for Print qlty and try copying again.
-
Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.
-
-
Layout
Select the layout.
-
2-sidedPrintSetting
Select whether to perform two-sided copying.
-
Collate
Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.
-
Frame erase copy
When copying thick originals such as books, you can make a copy without black margins around the image and gutter shadows.
