If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position.
![]()
|
You need to prepare: two sheets of A4 or Letter-sized Matte Photo Paper MP-101
Make sure that the power is turned on.
Load two sheets of supplied paper or A4 or Letter-sized Matte Photo Paper MP-101 in the rear tray.
Load the paper WITH THE PRINT SIDE (WHITER SIDE) FACING YOU in the rear tray.
![]()
|
Open the paper output tray gently, then pull out the output tray extension.
![]()
|
Hold down the RESUME/CANCEL button until the POWER lamp flashes white four times, then release it immediately.
The print head alignment sheet will be printed and the print head position will be adjusted automatically.
Do not perform any other operations until the printer completes the printing of the print head alignment sheet. This takes about 9 to 10 minutes.
![]()
|
Page top![]() |