Automatically Adjusting Different Colored Horizontal Streaks

If printed images are affected by banding in different colors across the sheet, execute Adjust print quality for automatic adjustment of the paper feed amount.

The printer prints and reads a test pattern for automatic adjustment of the feed amount.

Important

• When using highly transparent media, use manual adjustment.

  • Manually Adjusting Different Colored Horizontal Streaks

Note

• We recommend executing the adjustment if you have changed the paper type or paper size.

• Always check the Set priority values.

  • Paper feed adjustment

• If additional fine-tuning is necessary, execute Paper feed fine adjustment.

  • Fine-Tuning Paper Feed Amount

• Use Adjust feed length to ensure that lines in CAD drawings are printed at exactly the right length.

  • Adjusting Line Length
• This may take some time, depending on the type of paper.

Items to Prepare

When Using Rolls

An unused roll at least 8.00 in. (203.2 mm) wide

When Using Sheets

One sheet of unused paper of at least A4/Letter size

Follow the procedure below to adjust.

1. Load paper.

   • Loading Rolls in the Printer
   • Loading Roll Paper in the Roll Unit
   • Loading Sheets in the Printer

2. Select Maintenance on HOME screen.

3. Select Paper feed adjustment.

4. Select Adjust print quality.

5. Select Auto.

6. Select Roll paper 1, Roll paper 2 or Manual.

   A test pattern is printed for adjustment and adjustment is finished.