Paper is not cut straight

1. Check 1 Is the edge of the paper cutting position creased?

   Straighten out any curling by the edges of the paper.

2. Check 2 Is the edge of the paper cutting position lifting up when cutting?

   Reload the paper correctly.

3. Check 3 Is the paper a type that can be cut with the cutter blade?

   Set Cutting mode in the touch screen menu to User cut, then and cut the roll paper with a cutting implement such as scissors.

   • Specifying the Cutting Method for Rolls

4. Check 4 Are you using the basket or stacker properly?

   Make sure that you are using the basket or stacker properly.

   • Example Basket Configurations
   • Example Stacker Configurations

5. Check 5 Check that the Cut speed setting is correct

   Change the Cut speed setting in the touch screen menu.

   If the paper edge cannot be cut straight at the cut starting position, it may be improved by selecting slower cut speed than that selected currently.

   If the paper edge cannot be cut straight at the cut ending position, it may be improved by selecting faster cut speed than that selected currently.

   • Menu Structure

6. Check 6 Did the printing material slip diagonally while being cut?

   Set the Cutting mode in the touch screen menu to Eject cut, and then hold and cut the material after it has printed.

   • Specifying the Cutting Method for Rolls

7. Check 7 Is the cutter blade attached properly?

   Attach the cutter blade properly.

   • Replacing the Cutter Blade

8. Check 8 Is the edge of the cutter blade blunt?

   Replace the cutter blade.

   • Replacing the Cutter Blade