skip to main text

Example Stacker Configurations

The stacker is used by changing the position depending on the paper size of the printed materials.

Important

  • Depending on the types of paper, it cannot be stacked in the Position 2, Position 3, or Position 4. In this case, use the Position 1.

Stacking Printed Materials (Position 1)

This is the position when you stack the printed materials.

Pull down the rod (fixed) (C) toward you. Set the rod (adjustable) in the groove (B) at the lower of the arm, and then set the flapper (A) vertically so that the stacker configuration is the Position 1.

Stacking Printed Materials with a 36-inch Width or of A0 Portrait (Position 2)

This is the position when you stack the printed materials with a 36-inch width or of A0 portrait.

  • Paper orientation

    Portrait

  • Supported paper size

    • 36"x48" (ARCH E) 36.00 x 48.00 inches (914.4 x 1219.2 mm)
    • A0 33.11 x 46.81 inches (841.0 x 1189.0 mm)

Set the rod (adjustable) in the groove (B) at the upper of the stand, and then push down the rod (fixed) (C) to the printer side. Then set the flapper (A) vertically so that the stacker configuration is the Position 2.

Stacking Printed Materials with a 24-inch Width or of A1 Portrait (Position 3)

This is the position when you stack the printed materials with a 24-inch width or of A1 portrait.

  • Paper orientation

    Portrait

  • Supported paper size

    • 24"x36" (ARCH D) 24.00 x 36.00 inches (609.6 x 914.4 mm)
    • A1 23.39 x 33.11 inches (594.0 x 841.0 mm)

Pull down the rod (fixed) (E) toward you. Set the rod (adjustable) in the groove (B) at the upper of the stand, and then set the flapper (A) vertically so that the stacker configuration is the Position 3. Then attach the paper stopper (C) stored in the accessory pocket of the stand to the lower of the second part (D) from the right side of the flapper.

Stacking Printed Materials with a 36-inch Width, of A1 Landscape, with a 24-inch Width, or of A2 Landscape (Position 4)

This is the position when you stack the printed materials with a 36-inch width, of A1 landscape, with a 24-inch width, or of A2 landscape.

  • Paper orientation

    Landscape

  • Supported paper size

    • 24"x36" (ARCH D) 24.00 x 36.00 inches (609.6 x 914.4 mm)
    • 18"x24" (ARCH C) 18.00 x 24.00 inches (457.2 x 609.6 mm)
    • A1 23.39 x 33.11 inches (594.0 x 841.0 mm)
    • A2 16.54 x 23.39 inches (420.0 x 594.0 mm)

Pull down the rod (fixed) (C) toward you. Set the rod (adjustable) in the groove (B) at the upper of the stand, and then set the flapper (A) horizontally so that the stacker configuration is the Position 4.