Setting Items for Copying

Print Settings Screen

Note

• For more on the print settings screen or the setting item for Photo copy, see Copying Photos.

The following screen is displayed by selecting Settings in the Copy standby screen.

Example in Standard copy:

Preview

When Preview is displayed on the print settings screen, selecting Preview allows you to preview an image of the printout on the preview screen.

For details, see below.

• Displaying Preview Screen

Setting Items

Flick to display setting items and select the setting item to display the settings. Select to specify the setting.

Note

• Depending on the copy menu, some setting items cannot be selected. This section describes the setting items in Standard copy.

  The setting item which cannot be selected is displayed grayed out.

  For more on the setting items for Photo copy, see Copying Photos.

• Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, appears on the touch screen. In this case, select on the upper left on the touch screen to check the message and change the setting.

• The settings of the page size, media type, etc. are retained even if the printer is turned off.

• When copying starts in the copy menu that is not available with the specified setting, The specified function is not available with current settings. is displayed on the touch screen. Change the setting, following the on-screen instructions.

Following setting items can be changed.

• Intensity

  Specify the intensity.

  

  • A: Select to activate/deactivate automatic intensity adjustment.

    When ON is selected, the intensity is adjusted automatically according to the originals loaded on the platen.

  • B: Drag to specify the intensity.

• Magnif. (Magnification)

  Specify the reduction/enlargement method.

  • Reducing/Enlarging Copies

• Paper src

  Select a paper source (Rear tray/Cassette/Auto) where paper is loaded.

  Note

  • When Auto is selected, paper is fed from the paper source where the paper that matches the paper settings (page size and media type) is loaded.

• Page size

  Select the page size of the loaded paper.

• Type (Media type)

  Select the media type of the loaded paper.

• Print qlty (Print quality)

  Adjust print quality according to the original.

  Important

  • If you use Draft with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again.

  • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.

• Layout

  Select the layout.

  • Copying Two Pages onto Single Page
  • Copying Four Pages onto Single Page

• 2-sidedPrintSetting

  Select whether to perform two-sided copying.

  • Two-Sided Copying