skip to main text

Making Copies

This section describes the procedure to copy with Standard copy.

  1. Make sure printer is turned on.

  2. Load paper.

  3. Select Copy on the HOME screen.

  4. Select Standard copy.

    The Copy standby screen is displayed.

  5. Load original on platen glass.

  6. Specify settings as necessary.

    figure: LCD

    1. Displays the screen to specify the number of copies.

      figure: LCD

      Use the UPDOWN buttons to specify the number of copies and use the OK button to finalize.

      You can specify the number of copies after selecting Settings.

    2. Displays the screen to specify the color mode.

      figure: LCD

      Use the UPDOWN buttons to specify the color mode and use the OK button to finalize.

      You can specify the color mode after selecting Settings.

    3. Displays the print setting items.

      figure: LCD

      For more on the setting items:

    4. Displays the preview screen to preview an image of the printout.

      figure: LCD

      For details:

  7. Press Start button.

    The printer starts copying.

    Remove the original on the platen glass after copying is complete.

    Important

    • Do not open the document cover or remove the original from the platen glass until scanning is completed.

    Note

    • To cancel copying, press the Stop button.

Adding Copying Job (Reserve copy)

You can add the copying job while printing (Reserve copy).

The screen below is displayed when you can add the copying job.

figure: LCD

Load the original on the platen glass and press the Start button.

Important

  • When you load the original on the platen glass, move the document cover gently.

Note

  • When Print qlty (print quality) is set High, you cannot add the copying job.

  • When you add the copying job, the number of copies or the settings such as the page size or media type cannot be changed.

  • If you press the Stop button while reserve copying is in progress, the screen to select the method to cancel copying is displayed. If you select Cancel all reservations, you can cancel copying all scanned data. If you select Cancel the last reservation, you can cancel the last copying job.

  • If you set a document of too many pages to add the copying job, Cannot add more copy jobs. Please wait a while and redo the operation. may appear on the LCD. Select OK and wait a while, and then try copying again.

  • If Failed to reserve the copy job. Start over from the beginning. appears on the LCD when scanning, select OK and press the Stop button to cancel copying. After that, copy the documents that have not been finished copying.