Adjust Image Quality

This item is displayed when Menu then Adjustment/Maintenance is selected in the Home screen.

• Print Head Alignment

  Adjusts the alignment of print head.

  • Automatic Adjustment to Straighten Lines and Align Colors
  • Manual Adjustment to Straighten Lines and Align Colors

• Print Head Angle Adjustment

  Adjusts the print head angle.

  • Adjusting Line Misalignment

• Paper Feed Adjustment

  Sets the paper feed amount.

  • Set Priority

    Sets the method of adjusting the paper feed amount.

    • Auto

      Prioritize Print Quality or Prioritize Length Accuracy is automatically selected depending on the settings selected in the printer driver.

      Note

      • When copying, the setting is selected according to Original Type.

    • Prioritize Print Quality

      Adjusts the print quality to make the horizontal streaks of the print less noticeable. The setting for Adjust Print Quality is applied.

    • Prioritize Length Accuracy

      Adjusts the length of the ruled lines on the printed piece to match. The values for Change Adjustment Values under Adjust Feed Length are applied.

  • Adjust Print Quality

    Select this when the printed material has different colored horizontal streaks.

    • Automatically Adjusting Different Colored Horizontal Streaks
    • Manually Adjusting Different Colored Horizontal Streaks

  • Adjust Feed Length

    Select this to print the exact length of the ruled lines in a CAD drawing.

    • Adjusting Line Length

• Color Calibration

  Select this to perform the color calibration or check the adjustment information.

  • Performing Color Calibration

• Print Head Range of Motion

  Set the print head's range of motion.