skip to main text

Security

  • Administrator password setting

  • Standard user mode settings

    Select Enable/Disable for the standard user mode.

  • TLS server settings

    Make settings related to certificates for encrypted communication.

    Advanced TLS settings enables you to specify the range of TLS versions to be used, the algorithm to be used, and so on.

  • IEEE802.1X/EAP settings

    • Authentication

      Select an authentication method for IEEE802.1X/EAP authentication.

      Note

      • In the case of using IEEE802.1X certificate, Security > IEEE802.1X/EAP settings > CA certificate, and register the CA certificate.

      • Supported authentication method

        • EAP-TLS(Extensible Authentication Protocol-Transport Level Security)

        • EAP-TTLS(EAP-Tunneled TLS)

        • PEAP(Protected EAP)

    • Key and certificate settings

      Perform settings for key and client certificate.

    • CA certificate

      Perform settings for the CA certificate that verifies a server certificate.

    • Enable/disable IEEE802.1X/EAP

      Enable or disable IEEE802.1X/EAP authentication.

  • IPsec settings

    If enabled, you can set the IPsec security.

  • Import printer settings

    Imports the printer security settings.

  • Export printer settings

    Exports the printer security settings.

  • Security policy

    Allows you to set the security policy and check the setting values.

  • Encryption settings

    Performs settings related to encryption.

  • Password policy settings

    Sets the minimum number of characters and combinations of characters that can be set for the printer passwords such as the administrator password.

  • Restrict destinations

    Restricts the scan destination when set to Use.

  • Lockout settings

    Performs settings for the function that locks operations that require entering the password if the incorrect password is entered a specified number of times on the password entry screen.

  • USB settings

    • USB device settings

      Performs settings related to USB connection of the printer and PC.

      Restricts USB connection by selecting Do not use in Connect with USB.

    • USB host settings

      Performs settings related to the connection of USB flash drive to the printer.

      Restricts the use of USB Flash Drive by selecting Do not use in USB memory usage.

Note