Print settings

This item is displayed when you select Printer settings from (Setup) on the HOME screen.

• Prevent paper abrasion

  Use this setting only if the print surface becomes smudged.

  Important

  • Be sure to set this back to OFF after printing since it may result in lower print quality.

• Adjust horizontal print position

  Adjusts the print position when the left/right margins are not aligned.

  You can adjust the left/right margins in increments of 0.004 in. (0.1 mm) between -0.12 in. (-3 mm) and +0.12 in. (+3 mm) centered on the horizontal center of the paper.

  Important

  • When using 24 inch roll paper, the amount of adjustment that can be made is limited. You cannot make adjustments greater than this limit.

  • This function is enabled only when printing with borders. To adjust the left and right margins when printing with the minimal margins, it is required to change the setting value of the Roll paper minimal margin amount.

    • Setting the Minimal Margin Amount When Performing the Minimal Margin Printing

• Cleaner Lines/Text

  When enabled, lines and text are printed more sharply.

• IPP print settings

  Sets the image quality and paper settings for IPP printing.

  For example, when printing using AirPrint or Mopria Print Service, this setting value is applied.

• Default print settings

  Sets the default values for print settings.

  If Media Type is set to Auto (Use Printer Settings) in the printer driver, this setting value is applied.