Automatically Adjusting Different Colored Horizontal Streaks

If printed images are affected by banding in different colors across the sheet, execute Adjust print quality for automatic adjustment of the paper feed amount.

The printer prints and reads a test pattern for automatic adjustment of the feed amount.

Important

• When using highly transparent media, use manual adjustment.

  • Manually Adjusting Different Colored Horizontal Streaks

Note

• We recommend executing the adjustment if you have changed the paper type or paper size.

• Always check the Set priority values.

  • Paper feed adjustment

• Use Adjust feed length to ensure that lines in CAD drawings are printed at exactly the right length.

  • Adjusting Line Length
• This may take some time, depending on the type of paper.

Items to Prepare

When Using Rolls

Roll at least 11.69 in. (297.0 mm) wide

Follow the procedure below to adjust.

1. Load paper.

   • Loading Rolls in the Printer

2. Select (Setup) on the HOME screen.

   • Home Screen Menu Composition

3. Select Maintenance.

4. Select Paper feed adjustment.

5. Select Adjust print quality.

6. Check message and select OK.

7. Select Auto.

8. Select Roll paper to adjust.

   A test pattern is printed for adjustment and adjustment is finished.

Note

• Depending on the type of paper, horizontal streaks may not improve. If the horizontal streaks are not improved, adjust it manually.

  • Manually Adjusting Different Colored Horizontal Streaks