Paper is not cut straight

1. Check 1 Is the edge of the paper cutting position creased?

   Straighten out any curling by the edges of the paper.

2. Check 2 Is the edge of the paper cutting position lifting up when cutting?

   Reload the paper correctly.

3. Check 3 Are you using the basket properly?

   Make sure that you are using the basket properly.

   • Using the Desktop Basket
   • Using the Basket on the Printer Stand

4. Check 4 Check that the Cut speed setting is correct.

   Select (Setup) > Printer settings > Paper-related settings on Advanced paper settings in the touch screen menu, and change Cut speed.

   If the paper edge cannot be cut straight at the cut starting position, it may be improved by selecting slower cut speed than that selected currently.

   If the paper edge cannot be cut straight at the cut ending position, it may be improved by selecting faster cut speed than that selected currently.

   Select (Setup) > Printer settings > Paper-related settings on Advanced paper settings in the touch screen menu, and change the Cut speed setting.

   • Menu Structure

5. Check 5 Did the printing material slip diagonally while being cut?

   Set the Cutting mode in the touch screen menu to Eject cut, and then hold and cut the material after it has printed.

   • Specifying the Cutting Method for Rolls