skip to main text

Reconfiguration Method of LAN Connection/Reconfiguration Method of Wi-Fi Connection

Changing LAN Connection Method

Follow either procedure below to change LAN connection method (wired or wireless).

For Windows:
- Redo setup using the Setup CD-ROM or from the web page.
- Select Enable for Enable/disable Wired LAN or Enable/disable Wi-Fi in the touch screen menu.
  
  After that, perform settings on the Network Settings screen on IJ Network Device Setup Utility.
  
  For details, refer to Performing/Changing Wi-Fi Settings or Performing/Changing Wired LAN Connection (Ethernet Cable) Settings.
For macOS:

Redo setup from the web page.

Changing Wi-Fi Connection Method

Follow either procedure below to change Wi-Fi connection method (infrastructure or wireless direct).

For Windows:
- Redo setup using the Setup CD-ROM or from the web page.
- Perform settings on the Network Settings screen on IJ Network Device Setup Utility.
  
  Important
  - Before you perform settings using IJ Network Device Setup Utility, change the printer settings following the procedure below.
    1. Check that printer is turned on.
    2. Select (Network status) icon.
      - Menu Operations
      If you specify the administrator password, enter the password.
    3. Select Wi-Fi.
    4. Select Settings.
    5. Select Wi-Fi setup.
    6. Select Easy wireless connect.
    7. Check message and select OK.
      
      Follow instructions on your smartphone or tablet.
    8. If message saying setup is completed appears, select OK.
For macOS:

Redo setup from the web page.