Paper is not cut straight

1. Check 1 Is the edge of the paper cutting position creased?

   Straighten out any curling by the edges of the paper.

2. Check 2 Is the edge of the paper cutting position lifting up when cutting?

   Reload the paper correctly.

3. Check 3 Is the paper a type that can be cut with the cutter blade?

   Set Cutting mode in the touch screen menu to User cut, then and cut the roll paper with a cutting implement such as scissors.

   • Specifying the Cutting Method for Rolls
   • Cutting Roll Paper after Printing

4. Check 4 Are you using the basket properly?

   Make sure that you are using the basket properly.

   • Using the Basket on the Printer Stand

5. Check 5 Check that the Cut speed setting is correct.

   If the paper edge cannot be cut straight at the cut starting position, it may be improved by selecting slower cut speed than that selected currently.

   If the paper edge cannot be cut straight at the cut ending position, it may be improved by selecting faster cut speed than that selected currently.

   Select paper settings display area on Home screen of touch screen, select the feed slot where the paper to change is set, then select Paper settings > Advanced and change the setting value of Cut speed.

   • Advanced (Paper settings)

6. Check 6 Did the printing material slip diagonally while being cut?

   Set the Cutting mode in the touch screen menu to Eject cut, and then hold and cut the material after it has printed.

   • Specifying the Cutting Method for Rolls
   • Cutting Roll Paper after Printing

7. Check 7 Is the cutter blade attached properly?

   Attach the cutter blade properly.

   • Replacing the Cutter Blade

8. Check 8 Is the edge of the cutter blade blunt?

   Replace the cutter blade.

   • Replacing the Cutter Blade

9. Check 9 Are you printing on Large-Format?

   Change the position of the basket.

   • Printing on Large-Format or Easily Damaged Paper (Position 3)