Menu Structure
The * on the right side of an item indicates the default value.
Values may vary depending on your model and firmware version.
-
Ink information
This menu is displayed by tapping Ink icon.
Current estimated ink levels Replace Order ink now -
Paper settings
This menu is displayed by tapping paper information area.
Roll paper 1 Replace paper Feed/cut Remove paper Paper settings Width / Type / Advanced / Register Roll paper 2 Replace paper Feed/cut Remove paper Roll unit use setting Paper settings Width / Type / Advanced / Register Take-up mode Roll unit use setting Auto feed to take-up position Skip errors during take-up ON / OFF Wind up after cutting Enable / Disable Paper retention setting Release / Retain Use in take-up mode Use / Do not use Manual Replace paper Remove paper Paper settings Page size / Type / Advanced / Register -
Maintenance
Nozzle Check Print head cleaning Cleaning All colors / Pattern 1 / Pattern 2 / Pattern 3 Deep Cleaning All colors / Pattern 1 / Pattern 2 / Pattern 3 System cleaning All colors / Pattern 1 / Pattern 2 / Pattern 3 Print head alignment Auto (standard) Roll paper 1 / Roll paper 2 / Manual Auto (advanced) Roll paper 1 / Roll paper 2 / Manual Manual Roll paper 1 / Roll paper 2 / Manual Paper feed adjustment Set priority Adjust print quality Auto Roll paper 1 / Roll paper 2 / Manual Manual Roll paper 1 / Roll paper 2 / Manual Adjust feed length Print alignment pattern Roll paper 1 / Roll paper 2 / Manual Change adjustment values -0.70% / -0.68% / ... / 0.68% / 0.70% Color calibration Auto adjust Roll paper 1 / Roll paper 2 / Manual Enable/disable adjustment values Enable* / Disable Adjustment information Roll paper 1 / Roll paper 2 / Manual Calibration guide setting Enable / Disable* Reset adjustment values Maintenance cartridge info Maintenance cartridge usage Replace Head replacement Replace cutter blade unit Platen cleaning Prepare to move Move indoors on the same floor Move indoors to a different floor Transport outdoors -
Job management
Print job List of print jobs Del. selected / Delete / Priority printing Saved job Job box list Job list Delete / Print settings Print the job list Job history Display job history Print job history Pause printing Enable / Disable* Delete all print jobs -
Print from USB flash drive
Folder/file list Number of copies Preview Settings Color Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print qlty 5 (Fast) / 4 / 3* / 2 / 1 (High) Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Bordered* / None Rotate 0 degrees* / 90 degrees Enl./Red. Fit paper* / Same size / Scaling -
LAN settings
Wi-Fi Connection Network name (SSID) Communication mode Channel Wi-Fi security IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic setting IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length IPv6 manual address IPv6 manual prefix length IPv6 stateless address 1 IPv6 stateless prefix length 1 IPv6 stateless address 2 IPv6 stateless prefix length 2 IPv6 stateless address 3 IPv6 stateless prefix length 3 IPv6 stateless address 4 IPv6 stateless prefix length 4 DHCPv6 DHCPv6 stateful address DHCPv6 stateful prefix length IPv6 default gateway 1 IPv6 default gateway 2 IPv6 default gateway 3 IPv6 default gateway 4 IPv6 primary DNS server address IPv6 secondary DNS server add. IPv6 DNS dyn. update: manual IPv6 DNS dyn. update: stateless IPv6 DNS dyn. update: stateful IPv6 Use IPv4 host/domain name IPv6 DNS host name IPv6 DNS domain name MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wi-Fi Enable / Disable Wi-Fi setup Easy wireless connect Manual connect WPS (Push button method) Other connection types Manual connect (adv.) WPS (PIN code method) Advanced Wireless Direct Connection Network (SSID)/device name Password Communication mode Channel Wi-Fi security IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic setting IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wireless Direct Yes / No Update SSID/password Yes / No Wireless Direct device name Connection request confirmation ON* / OFF Advanced Wired LAN Connection IPv4 address IPv4 subnet mask IPv4 default gateway IPv4 DNS dynamic setting IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length IPv6 manual address IPv6 manual prefix length IPv6 stateless address 1 IPv6 stateless prefix length 1 IPv6 stateless address 2 IPv6 stateless prefix length 2 IPv6 stateless address 3 IPv6 stateless prefix length 3 IPv6 stateless address 4 IPv6 stateless prefix length 4 DHCPv6 DHCPv6 stateful address DHCPv6 stateful prefix length IPv6 default gateway 1 IPv6 default gateway 2 IPv6 default gateway 3 IPv6 default gateway 4 IPv6 primary DNS server address IPv6 secondary DNS server add. IPv6 DNS dyn. update: manual IPv6 DNS dyn. update: stateless IPv6 DNS dyn. update: stateful IPv6 Use IPv4 host/domain name IPv6 DNS host name IPv6 DNS domain name MAC address IPsec settings Printer name Bonjour service name Settings Enable/disable Wired LAN Enable / Disable Advanced Print details -
Device settings
Test print Nozzle Check Status print Status print (administrator) Print LAN details Print setting print Print advanced paper settings Print job history Print menu map Print settings Print head movable width setting Data width* / Maximum movable width / Paper width Prioritize paper size Enable / Disable* Magnification level for borderless Large / Medium* / Small / Minimum PDF print settings Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Input resolution 600 dpi / 300 dpi* Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Display during process Warning display Enable / Disable* JPEG print settings Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Input resolution 600 dpi / 300 dpi* Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Print from USB flash settings Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling AirPrint print settings Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / ICC profile (perceptual) / ICC profile (saturation) / ICC profile (relative) / ICC profile (absolute) Clear coating Auto* / Overall / OFF Paper settings No spaces at top or bottom ON / OFF* Unidirectional printing Enable / Disable* Direct print settings from FTP Print settings 1 Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Print settings 2 Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Print settings 3 Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Print settings 4 Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Paper settings Paper src Auto select* / Roll paper (auto) / Roll paper 1 / Roll paper 2 / Manual Margin 3mm* / 5mm Border Borderless / Bordered* Rotate 0 degrees* / 90 degrees Enlarge/Reduce Fit paper size* / Same size / Scaling Default print settings Print quality settings Color mode Color (perceptual)* / Color (saturation) / Color (correct off) / Monochrome Print quality 5 (Standard) / 4 / 3* / 2 / 1 (Highest) Clear coating Auto* / Overall / OFF Print setting print Yes / No LAN settings
The lower items of this menu are the same as the lower items of LAN settings.Paper-related settings Roll paper auto feed Enable* / Disable Media type selection method Manual / Auto detect / Auto with confirmation* / Use current media type Manage remaining roll amount Barcodes / Auto estimate* / Disable Roll amount warning setting Roll amount 6 (earlier warning) / Roll amount 5 / Roll amount 4 / Roll amount 3 (standard)* / Roll amount 2 / Roll amount 1 (later warning) Switch roll paper when low Enable / Disable* Roll paper auto switching Identify size* / Do not identify size Detect paper setting mismatch Pause / Display warning* / Do not detect / Hold job Paper retention setting Release / While feeding* Paper size recognition settings Cut sheet setting 1 Cut sheet setting 2 Roll paper setting 1 Roll paper setting 2 Roll paper setting 3 Roll paper setting 4 Roll paper setting 5 Roll paper setting 6 Roll paper setting 7 Adjust roll unit Keep margin at cut sheet end Enable / Disable* Advanced paper settings Print advanced paper settings Yes / No Reset all detection priority data Yes / No Reset paper settings for all paper Yes / No Auto maintenance settings Auto nozzle check Standard* / 1 page / 10 pages / Disable Nozzle check error display Enable / Disable* System cleaning frequency Standard* / Short Print pattern after new head ON* / OFF Hard disk settings Output method Print* / Print (auto delete) / Save to job box Save first and print ON / OFF* Common job box setting Print* / Print (auto delete) Data deletion Fast / Fast secure / Secure / Secure (VSITR) Monitoring service settings Enable/disable monitoring service Enable / Disable* Communication test Yes / No Communication log Timing for ink level notification Standard* / Earlier notification Other device settings Energy saving settings Auto power off 5 minutes / 10 min. / 30 min. / 1 hour / 4 hours / 8 hours / 12 hours / OFF Sleep timer 5 minutes* / 10 min. / 15 min. / 20 min. / 30 min. / 40 min. / 50 min. / 60 min. Operation restrictions Job history Restrict / Do not restrict* Remote UI Restrict / Do not restrict* Print from USB flash drive Restrict / Do not restrict* Use USB connection Use* / Do not use Date/time setting Date display format YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY Time zone (GMT) 0 / +1 / +2 / +3 / +4 / +5 / +6 / +7 / +8 / +9 / +10 / +11 / +12 / -12 / -11 / -10 / -9 / -8 / -7 / -6 / -5 / -4 / -3 / -2 / -1 Length unit setting Meters* / Feet/inches Buzzer setting Enable* / Disable EOP timer setting 1 minute / 2 minutes / 5 minutes / 10 minutes* / 30 minutes / 60 minutes Job history sending setting Send / Do not send* Printer info sending settings Agree / Do not agree Menu row height Wide* / Standard Language selection Firmware update Install update Check current version Update notification setting DNS server setup Auto setup* / Manual setup Proxy server setup Use / Do not use* Administrator password setting Remote UI or other tools / LCD, Remote UI, or other tools -
Printer information
System information Hard disk information Error history Hardware error Recoverable error Paper feed/transfer error Usage totals Total print area Ink consumed Duty counter Head information Head alignment performance log Values applied with auto settings Paper Thickness (Head Height) Transport unit vacuum strength