Advanced (LAN settings)

Flick HOME screen and tap LAN settings, Wi-Fi / Wireless Direct / Wired LAN > Settings > Advanced.

The * on the right side of an item indicates the default value.

Advanced
	Set printer name
	TCP/IP settings
		IPv4
			IP address
				Auto setup* / Manual setup
			DNS server
				DNS server setup
					Auto setup* / Manual setup
				Dynamic update setting
					Active / Inactive*
				Host name
				Domain name
			Proxy server
				Use / Do not use*
			DHCP option settings
				Acquire host name
					Enable / Disable*
				DNS dynamic update
					Enable / Disable*
				Acquire domain name
					Enable / Disable*
		IPv6
			Enable/disable IPv6
				Enable* / Disable
			IPsec settings
				Active / Inactive*
			Use DHCPv6
				Use* / Do not use
			Manual address
				Use / Do not use*
			DNS server
				DNS server setup
					Auto setup* / Manual setup
				Dynamic update setting
					IPv6 DNS dyn. update: manual
						Active / Inactive*
					IPv6 DNS dyn. update: stateless
						Active / Inactive*
					IPv6 DNS dyn. update: stateful
						Active / Inactive*
				IPv6 Use IPv4 host/domain name
					Active / Inactive*
				IPv6 DNS host name
				IPv6 DNS domain name
			DHCP option settings
				Acquire host name
					Enable / Disable*
				DNS dynamic update
					Enable / Disable*
				Acquire domain name
					Enable / Disable*
	WSD setting
		Enable/disable WSD
			Enable / Disable*
		Optimize inbound WSD
			Enable* / Disable
		Timeout setting
			20 minutes / 15 minutes* / 10 minutes / 5 minutes / 1 minute
	Bonjour settings
		Enable/disable Bonjour
			Enable* / Disable
		Service name
	IEEE802.1X settings
		Authentication
		Do not use* / TLS / TTLS / PEAP
EAP-TTLS internal auth. method
	MSCHAPv2* / PAP
Weak encryption restriction
	Restrict* / Do not restrict
Weak certificate restriction
	Restrict* / Do not restrict
Advanced setup
	User-ID
	Username
	Password
	Authentication server name
	Verify auth. server name
		Enable* / Disable
	Verify auth. server certificates
		Enable* / Disable
Last authentication result
SNTP settings
	Client operation status
		Active / Inactive*
	NTP server address
	Polling interval
Spanning tree setting
	Active / Inactive*
LPR protocol setting
	Enable* / Disable
RAW protocol
	ON* / OFF
LLMNR
	ON* / OFF
Gigabit Ethernet settings
	Autonegotiation* / 10 Mbps half duplex / 10 Mbps full duplex / 100 Mbps half duplex / 100 Mbps full duplex / 1 Gbps full duplex
Use Dedicated Port
	ON* / OFF
IPP settings
	Enable/disable IPP
		Enable* / Disable
	Security Print
		Enable* / Disable
Wi-Fi DRX setting
	Enable* / Disable
Wired LAN DRX setting
	Enable* / Disable
Reset SSL certificates
Reset LAN settings