Advanced (Paper settings)
Tap the paper information area and tap Paper settings to display this menu.
Advanced | ||||
Roll length (change default) | ||||
Head height | ||||
Auto / High / Medium-high / Standard / Medium-low / Low / Super low | ||||
Skew detection accuracy | ||||
Standard / Loose / OFF | ||||
Cutting mode | ||||
Automatic cut / Eject cut / User cut | ||||
Cut speed | ||||
Fast / Standard / Slow | ||||
Trim edge first | ||||
Auto / Off / On(Preset Length) / On(Input Length) / Manual | ||||
Cut-dust reduction | ||||
ON / OFF | ||||
Transport unit vacuum strength | ||||
Auto / Strong / Medium-strong / Standard / Medium-weak / Weak | ||||
Guide arm retention pressure | ||||
High / Low | ||||
Roll paper tension (printing) | ||||
High / Standard / Low | ||||
Roll paper tension (feeding) | ||||
High / Standard / Low | ||||
Roll paper tension (winding up) | ||||
High / Standard / Low | ||||
Pause between scans | ||||
Ink drying wait time | ||||
OFF / 0.5 seconds / 1 second / 3 seconds / 5 seconds / 7 seconds / 9 seconds | ||||
Ink drying target area | ||||
Overall / Leading edge | ||||
Pause between pages | ||||
OFF / 30 seconds / 1 minute / 3 minutes / 5 minutes / 10 minutes / 30 minutes / 60 minutes | ||||
Pause on last page take-up | ||||
OFF / 5 minutes / 10 minutes / 30 minutes / 60 minutes / 120 minutes / 240 minutes / 480 minutes / 960 minutes | ||||
Pause timing priority | ||||
Between pages / On last page | ||||
Leading edge margin (roll) | ||||
3mm / 20mm | ||||
Leading edge margin (sheet) | ||||
3mm / 20mm | ||||
Extension for borderless printing | ||||
Paper with recommended width | ||||
Large / Standard / Small | ||||
Paper with adequate width | ||||
Select extension amount | ||||
1 (min) / 2 / 3 / 4 / 5 / 6 / 7 / 8 (max) | ||||
Sample of extension amounts | ||||
1 (min) / 2 / 3 / 4 / 5 / 6 / 7 / 8 (max) | ||||
Detect paper width | ||||
Enable / Disable | ||||
Paper tube outer diameter | ||||
Paper thickness | ||||
Auto-rewind roll paper at sleep | ||||
Active / Inactive | ||||
Reset detection priority data | ||||
Yes / No | ||||
Reset paper settings by paper | ||||
Yes / No |