Printing Network Settings

Use the operation panel to print the printer's current network settings.

Important

• The network settings printout contains important information about your network. Handle it with care.

1. Make sure printer is turned on.

2. Load plain paper.

   • Loading Rolls on the Roll Holder
   • Loading the Upper Roll on the Printer

   If you use sheets, prepare at least 10 sheets (A4 or Letter-sized).

   • Loading Sheets in the Printer

3. Flick HOME screen and tap Device settings.

   • Menu Operations

   The menu screen appears.

4. Tap Test print.

   If you specify the administrator password, enter the password.

5. Tap Print LAN details.

6. Tap Yes.

   The printer starts printing network settings information.

   Note

   • You can also print the printer's network settings. Tap Device settings on the HOME screen, tap LAN settings and Confirm LAN settings in this order, and then tap Print LAN details and tap Yes.

   The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.)

   Item	Description	Setting
   LAN Setting	Basic setting information	-
   Basic Info	IPv4 setting information (Wired LAN)	-
   LAN Interface Mode	Current interface	Wired LAN/Wireless LAN(Infra)/Wireless LAN(AP)/Wireless(Direct connection)/Disabled
   Link Active	Operation status	Inactive/Active
   IP Address	IPv4 IP address	XXX.XXX.XXX.XXX
   Gateway Address	IPv4 default gateway	XXX.XXX.XXX.XXX
   Subnet Mask	IPv4 subnet mask	XXX.XXX.XXX.XXX
   IP Mode	Acquiring method of IPv4 IP address	Auto IP/DHCP/Manual
   Use DNS Auto Mode	Acquiring DNS server automatically	On/Off
   Primary DNS Server Address	Primary DNS server address	XXX.XXX.XXX.XXX
   Secondary DNS Server Address	Secondary DNS server address	XXX.XXX.XXX.XXX
   Control Filtering	SNMP filtering setting information	-
   Use IP Filtering	Operation status of IP filtering	On/Off
   IP Filtering Select	IP filtering method	Disabled/Enabled
   IP Filtering Permission Address	IP filtering permission address	-
   Start Address 1	Start address 1	XXX.XXX.XXX.XXX
   End Address 1	End address 1	XXX.XXX.XXX.XXX
   Use Single On 1	Use single on 1	On/Off
   Start Address 2	Start address 2	XXX.XXX.XXX.XXX
   End Address 2	End address 2	XXX.XXX.XXX.XXX
   Use Single On 2	Use single on 2	On/Off
   Start Address 3	Start address 3	XXX.XXX.XXX.XXX
   End Address 3	End address 3	XXX.XXX.XXX.XXX
   Use Single On 3	Use single on 3	On/Off
   Start Address 4	Start address 4	XXX.XXX.XXX.XXX
   End Address 4	End address 4	XXX.XXX.XXX.XXX
   Use Single On 4	Use single on 4	On/Off
   Start Address 5	Start address 5	XXX.XXX.XXX.XXX
   End Address 5	End address 5	XXX.XXX.XXX.XXX
   Use Single On 5	Use single on 5	On/Off
   IP Filtering Prohibit Address	IP filtering prohibit address	-
   Start Address 1	Start address 1	XXX.XXX.XXX.XXX
   End Address 1	End address 1	XXX.XXX.XXX.XXX
   Use Single On 1	Use single on 1	On/Off
   Start Address 2	Start address 2	XXX.XXX.XXX.XXX
   End Address 2	End address 2	XXX.XXX.XXX.XXX
   Use Single On 2	Use single on 2	On/Off
   Start Address 3	Start address 3	XXX.XXX.XXX.XXX
   End Address 3	End address 3	XXX.XXX.XXX.XXX
   Use Single On 3	Use single on 3	On/Off
   Start Address 4	Start address 4	XXX.XXX.XXX.XXX
   End Address 4	End address 4	XXX.XXX.XXX.XXX
   Use Single On 4	Use single on 4	On/Off
   LAN Setting	Basic setting information	-
   Basic Info	IPv4 setting information (Wired LAN)	-
   Control Filtering	SNMP filtering setting information	-
   IP Filtering Prohibit Address	IP filtering prohibit address	-
   Start Address 5	Start address 5	XXX.XXX.XXX.XXX
   End Address 5	End address 5	XXX.XXX.XXX.XXX
   Use Single On 5	Use single on 5	On/Off
   Print Filtering	Print filtering setting information	-
   Use IP Filtering	Operation status of IP filtering	On/Off
   IP Filtering Select	IP filtering method	Disabled/Enabled
   IP Filtering Permission Address	IP filtering permission address	-
   Start Address 1	Start address 1	XXX.XXX.XXX.XXX
   End Address 1	End address 1	XXX.XXX.XXX.XXX
   Use Single On 1	Use single on 1	On/Off
   Start Address 2	Start address 2	XXX.XXX.XXX.XXX
   End Address 2	End address 2	XXX.XXX.XXX.XXX
   Use Single On 2	Use single on 2	On/Off
   Start Address 3	Start address 3	XXX.XXX.XXX.XXX
   End Address 3	End address 3	XXX.XXX.XXX.XXX
   Use Single On 3	Use single on 3	On/Off
   Start Address 4	Start address 4	XXX.XXX.XXX.XXX
   End Address 4	End address 4	XXX.XXX.XXX.XXX
   Use Single On 4	Use single on 4	On/Off
   Start Address 5	Start address 5	XXX.XXX.XXX.XXX
   End Address 5	End address 5	XXX.XXX.XXX.XXX
   Use Single On 5	Use single on 5	On/Off
   IP Filtering Prohibit Address	IP filtering prohibit address	-
   Start Address 1	Start address 1	XXX.XXX.XXX.XXX
   End Address 1	End address 1	XXX.XXX.XXX.XXX
   Use Single On 1	Use single on 1	On/Off
   Start Address 2	Start address 2	XXX.XXX.XXX.XXX
   End Address 2	End address 2	XXX.XXX.XXX.XXX
   Use Single On 2	Use single on 2	On/Off
   Start Address 3	Start address 3	XXX.XXX.XXX.XXX
   End Address 3	End address 3	XXX.XXX.XXX.XXX
   Use Single On 3	Use single on 3	On/Off
   Start Address 4	Start address 4	XXX.XXX.XXX.XXX
   End Address 4	End address 4	XXX.XXX.XXX.XXX
   Use Single On 4	Use single on 4	On/Off
   Start Address 5	Start address 5	XXX.XXX.XXX.XXX
   End Address 5	End address 5	XXX.XXX.XXX.XXX
   Use Single On 5	Use single on 5	On/Off
   LAN Setting	Basic setting information	-
   IPv6 Info	IPv6 setting information (Wired LAN)	-
   Link Local Address	Link local address	-
   IP Address	IPv6 IP address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length	Link local address prefix length	XXX (0 to 128)
   Use Manual Mode	Operation status of IPv6 manual address	On/Off
   Manual Address	Manual address	-
   IP Address	IPv6 IP address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length	Prefix length	XXX (0 to 128)
   Use Stateful Address Mode	Operation status of stateful address mode	On/Off
   Stateful Address	Stateful address	-
   IP Address	IPv6 IP address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length	Prefix length	XXX (0 to 128)
   Stateless Address	Stateless address	-
   IP Address 1	IP address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length 1	Prefix length 1	XXX (0 to 128)
   IP Address 2	IP address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length 2	Prefix length 2	XXX (0 to 128)
   IP Address 3	IP address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length 3	Prefix length 3	XXX (0 to 128)
   IP Address 4	IP address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length 4	Prefix length 4	XXX (0 to 128)
   Gateway Address	Gateway address	-
   IP Address 1	IP address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length 1	Prefix length 1	XXX (0 to 128)
   IP Address 2	IP address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length 2	Prefix length 2	XXX (0 to 128)
   IP Address 3	IP address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length 3	Prefix length 3	XXX (0 to 128)
   IP Address 4	IP address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Prefix Length 4	Prefix length 4	XXX (0 to 128)
   Use DNS Auto Mode	Acquiring DNS server automatically	On/Off
   Primary DNS Server Address	Primary DNS server address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Secondary DNS Server Address	Secondary DNS server address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Control Filtering	SNMP filtering setting information	-
   Use IP Filtering	Operation status of IP filtering	On/Off
   IP Filtering Select	IP filtering method	Disabled/Enabled
   IPv6 Filtering Permission Info	IPv6 filtering permission information	-
   IP Filtering Start Address 1	IP filtering start address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 1	IP filtering end address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 1	Use single on 1	On/Off
   LAN Setting	Basic setting information	-
   IPv6 Info	IPv6 setting information (Wired LAN)	-
   Control Filtering	SNMP filtering setting information	-
   IP Filtering Start Address 2	IP filtering start address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 2	IP filtering end address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 2	Use single on 2	On/Off
   IP Filtering Start Address 3	IP filtering start address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 3	IP filtering end address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 3	Use single on 3	On/Off
   IP Filtering Start Address 4	IP filtering start address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 4	IP filtering end address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 4	Use single on 4	On/Off
   IP Filtering Start Address 5	IP filtering start address 5	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 5	IP filtering end address 5	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 5	Use single on 5	On/Off
   IPv6 Filtering Prohibit Info	IPv6 Filtering prohibit information	-
   IP Filtering Start Address 1	IP filtering start address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 1	IP filtering end address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 1	Use single on 1	On/Off
   IP Filtering Start Address 2	IP filtering start address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 2	IP filtering end address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 2	Use single on 2	On/Off
   IP Filtering Start Address 3	IP filtering start address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 3	IP filtering end address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 3	Use single on 3	On/Off
   IP Filtering Start Address 4	IP filtering start address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 4	IP filtering end address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 4	Use single on 4	On/Off
   IP Filtering Start Address 5	IP filtering start address 5	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 5	IP filtering end address 5	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 5	Use single on 5	On/Off
   Print Filtering	Print filtering setting information	-
   Use IP Filtering	Operation status of IP filtering	On/Off
   IP Filtering Select	IP filtering method	Disabled/Enabled
   IP Filtering Permission Info	IP filtering permission information	-
   IP Filtering Start Address 1	IP filtering start address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 1	IP filtering end address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 1	Use single on 1	On/Off
   IP Filtering Start Address 2	IP filtering start address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 2	IP filtering end address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 2	Use single on 2	On/Off
   LAN Setting	Basic setting information	-
   IPv6 Info	IPv6 setting information (Wired LAN)	-
   Print Filtering	Print filtering setting information	-
   IP Filtering Start Address 3	IP filtering start address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 3	IP filtering end address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 3	Use single on 3	On/Off
   IP Filtering Start Address 4	IP filtering start address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 4	IP filtering end address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 4	Use single on 4	On/Off
   IP Filtering Start Address 5	IP filtering start address 5	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 5	IP filtering end address 5	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 5	Use single on 5	On/Off
   IPv6 Filtering Prohibit Info	IPv6 Filtering prohibit information	-
   IP Filtering Start Address 1	IP filtering start address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 1	IP filtering end address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 1	Use single on 1	On/Off
   IP Filtering Start Address 2	IP filtering start address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 2	IP filtering end address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 2	Use single on 2	On/Off
   IP Filtering Start Address 3	IP filtering start address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 3	IP filtering end address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 3	Use single on 3	On/Off
   IP Filtering Start Address 4	IP filtering start address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 4	IP filtering end address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 4	Use single on 4	On/Off
   IP Filtering Start Address 5	IP filtering start address 5	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   IP Filtering End Address 5	IP filtering end address 5	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   Use Single On 5	Use single on 5	On/Off
   MAC Info	MAC address setting information (Wired/Wireless LAN)	-
   MAC Address(Wired)	MAC address (Wired LAN)	XX:XX:XX:XX:XX:XX
   MAC Address(Wireless)	MAC address (Wireless LAN)	XX:XX:XX:XX:XX:XX
   Use MAC Address Filtering	Operation status of MAC address filtering	On/Off
   MAC Filtering Select	MAC address filtering method	Disabled/Enabled
   MAC Filtering Permission Info	MAC filtering permission information	-
   MAC Address 1	MAC address 1	XX:XX:XX:XX:XX:XX
   MAC Address 2	MAC address 2	XX:XX:XX:XX:XX:XX
   MAC Address 3	MAC address 3	XX:XX:XX:XX:XX:XX
   MAC Address 4	MAC address 4	XX:XX:XX:XX:XX:XX
   MAC Address 5	MAC address 5	XX:XX:XX:XX:XX:XX
   LAN Setting	Basic setting information	-
   MAC Info	MAC address setting information (Wired/Wireless LAN)	-
   MAC Filtering Prohibit Info	MAC filtering prohibit information	-
   MAC Address 1	MAC address 1	XX:XX:XX:XX:XX:XX
   MAC Address 2	MAC address 2	XX:XX:XX:XX:XX:XX
   MAC Address 3	MAC address 3	XX:XX:XX:XX:XX:XX
   MAC Address 4	MAC address 4	XX:XX:XX:XX:XX:XX
   MAC Address 5	MAC address 5	XX:XX:XX:XX:XX:XX
   Proxy Setting	Proxy server setting information	-
   Use Proxy	Use proxy server	On/Off
   Proxy Server Address	Proxy server address	XXXXXXXXXXXXXXXX (up to 128 characters)
   Proxy Port Number	Proxy port specification	1 to 65535
   Use User Authority Mode	Use user authority mode	On/Off
   Proxy Server User Name	Proxy server user name	XXXXXXXXXXXXXXXX (up to 64 characters)
   Wireless LAN Setting	Wireless LAN setting information	-
   Channel	Channel (infrastructure)	XXX (0 to 255)
   SSID	SSID	Wireless LAN (infrastructure) SSID (up to 32 characters)
   Security Type	Security type for Wireless LAN (infrastructure)	Disabled/WEP 64bit/WEP 128bit/WPA PSK TKIP/WPA PSK AES/WPA2 PSK TKIP/WPA2 PSK AES/MIXED
   WEP1	WEP key 1 for Wireless LAN (infrastructure)	XXXXXXXX (up to 32 characters)
   WEP2	WEP key 2 for Wireless LAN (infrastructure)	XXXXXXXX (up to 32 characters)
   WEP3	WEP key 3 for Wireless LAN (infrastructure)	XXXXXXXX (up to 32 characters)
   WEP4	WEP key 4 for Wireless LAN (infrastructure)	XXXXXXXX (up to 32 characters)
   WEP Certificate	WEP certificate for Wireless LAN (infrastructure)	Open/Shared/Auto
   WEP Format	WEP format for Wireless LAN (infrastructure)	Hex/String
   Direct Connection Setting	Direct connection setting information	-
   Channel	Channel (Direct connection)	XXX (0 to 255)
   SSID	SSID	Wireless LAN SSID (Direct connection)
   Security Type	Security type for Wireless LAN (Direct connection)	Disabled/WPA2 PSK TKIP/WPA2 PSK AES
   Protocol Setting	Protocol setting information	-
   Printer Name	Printer name	XXXXXXXX (up to 16 characters)
   Use LPR	Use LPR	On/Off
   Printer Location	Printer location	XXXXXXXX (up to 16 characters)
   Use Wired Power Save	Discontinuous reception (Wired LAN)	On/Off
   Use Wireless Power Save	Discontinuous reception (Wireless LAN)	On/Off
   Use RAW	Use RAW	On/Off
   Use LLMNR	Use LLMNR	On/Off
   Use Spanning Tree	Use spanning tree	On/Off
   WSD Setting	WSD setting information	-
   Use WSD	Use WSD	On/Off
   WSD Timeout	Timeout	1/5/10/15/20 [min]
   Use WSD Push Scan	Use WSD push scan	On/Off
   Use WSD Rx Optimization	Use WSD reception optimization	On/Off
   SNMP Setting	SNMP setting information	-
   Use SNMPv1	Use SNMPv1	On/Off
   Use SNMPv3	Use SNMPv3	On/Off
   SNMP Community Name1	SNMP community name 1	XXXXXXXX (up to 32 characters)
   SNMP Community Name2	SNMP community name 2	XXXXXXXX (up to 32 characters)
   SNMP Extra Access Authority	SNMP extra access authority	Disable/Read Only/Read Write
   SNMP Access Authority1	SNMPv1 community1/2 access authority	Read Only/Read Write
   SNMP Access Authority2	SNMPv1 community1/2 access authority	Disable/Read Only/Read Write
   SNMPV3 Setting	SNMPV3 setting information	-
   User1	User 1	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   Use SNMPv3	Use SNMPv3	On/Off
   MIB Access Restriction	MIB access restriction	Read Only/Read Write
   Security Setting	Security setting	No Auth No Priv/Auth No Priv/Auto Priv
   Authority Algorithm	Authority algorithm	Null/MD5/SHA1
   Encryption Algorithm	Encryption algorithm	Null/AES/DES
   User2	User 2	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   Use SNMPv3	Use SNMPv3	On/Off
   MIB Access Restriction	MIB access restriction	Read Only/Read Write
   Security Setting	Security setting	No Auth No Priv/Auth No Priv/Auto Priv
   Authority Algorithm	Authority algorithm	Null/MD5/SHA1
   Encryption Algorithm	Encryption algorithm	Null/AES/DES
   SNMPV3 Setting	SNMPV3 setting information	-
   User3	User 3	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   Use SNMPv3	Use SNMPv3	On/Off
   MIB Access Restriction	MIB access restriction	Read Only/Read Write
   Security Setting	Security setting	No Auth No Priv/Auth No Priv/Auto Priv
   Authority Algorithm	Authority algorithm	Null/MD5/SHA1
   Encryption Algorithm	Encryption algorithm	Null/AES/DES
   User4	User 4	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   Use SNMPv3	Use SNMPv3	On/Off
   MIB Access Restriction	MIB access restriction	Read Only/Read Write
   Security Setting	Security setting	No Auth No Priv/Auth No Priv/Auto Priv
   Authority Algorithm	Authority algorithm	Null/MD5/SHA1
   Encryption Algorithm	Encryption algorithm	Null/AES/DES
   User5	User 5	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   Use SNMPv3	Use SNMPv3	On/Off
   MIB Access Restriction	MIB access restriction	Read Only/Read Write
   Security Setting	Security setting	No Auth No Priv/Auth No Priv/Auto Priv
   Authority Algorithm	Authority algorithm	Null/MD5/SHA1
   Encryption Algorithm	Encryption algorithm	Null/AES/DES
   Dynamic DNS Setting	Dynamic DNS setting	-
   IPv4	IPv4	-
   Use Dynamic DNS	Operation status of Dynamic DNS	On/Off
   Host Name	Host name	XXXXXXXX (up to 64 characters)
   Domain Name	Domain name	XXXXXXXX (up to 65 characters)
   IPv6	IPv6	-
   Use Manual Address	DNS dynamic setting of manual address	On/Off
   Use Stateless Address	DNS dynamic setting of stateless address	On/Off
   Use Stateful Address	DNS dynamic setting of stateful address	On/Off
   Use Name As IPv4	Use same host name/domain name as that used for IPv4	On/Off
   Host Name	Host name	XXXXXXXX (up to 64 characters)
   Domain Name	Domain name	XXXXXXXX (up to 65 characters)
   SNTP Setting	SNTP setting information	-
   Use SNTP	Use SNTP	On/Off
   SNTP Polling Interval	SNTP polling interval	1 to 48 [sec]
   SNTP Server Name	SNTP server name	XXXXXXXX (up to 256 characters)
   FTP Setting	FTP setting information	-
   Use FTP	Use FTP	On/Off
   Use FTP Authority	Use FTP authority	On/Off
   FTP User Name	FTP user name	XXXXXXXX (up to 33 characters)
   Bonjour Setting	Bonjour setting information	-
   Use Bonjour	Use Bonjour	On/Off
   Bonjour Service Name	Bonjour service name	Bonjour service name (Up to 50 alphanumeric characters)
   802.1X Setting	802.1X setting information	-
   Authority Type	Enable/disable 802.1X and authority type	Do not use/EAP-TLS/EAP-TTLS/PEAP
   EAP TTLS Type	Internal authority type for EAP-TTLS	MSCHAPv2/PAP
   Weak Encryption Restriction	Weak encryption restriction	Do not restrict/Restrict
   Weak Certificate Restriction	Weak certificate restriction	Do not restrict/Restrict
   Login Name	Login name	XXXXXXXX (up to 24 characters)
   User Name	User name	XXXXXXXX (up to 24 characters)
   Server Name	Server name	XXXXXXXX (up to 43 characters)
   IPsec Setting	IPsec setting information	-
   Use IPsec	Use IPsec	On/Off
   Previous Shared Key	Previous shared key for IPsec	XXXXXXXX (up to 17 characters)
   Phase2 Protocol	IPsec phase2 protocol	AH/ESP/AH+ESP
   IPP Setting	IPP confirmation setting	-
   Use IPP	Use IPP	On/Off
   Use IPP Authority	Use IPP authority	On/Off
   IPP User Setting	IPP confirmation user setting	-
   User1	User 1	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User2	User 2	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User3	User 3	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User4	User 4	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User5	User 5	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User6	User 6	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User7	User 7	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User8	User 8	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User9	User 9	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   User10	User 10	-
   User Name	User name	XXXXXXXX (up to 32 characters)
   Email Setting	E-mail setting information	-
   Retry Count	E-mail retry count	0 to 5
   Retry Interval	E-mail retry interval	1 to 60 (min)
   Use Email Notification	Use E-mail notification	On/Off
   Use SSL	Use SSL	On/Off
   Use SSL Cert No Check	Use SSL certification	On/Off
   Use Mailbox Delete	Use mailbox delete	On/Off
   Email Setting	E-mail setting information	-
   SMTP Server Address	SMTP server address	XXXXXXXX (up to 256 characters)
   SMTP Server Port No	SMTP server port number	1 to 65535
   SMTP State	SMTP state	Invalid/Authorized/POP before SMTP
   From Address 1	From address 1	XXXXXXXX (up to 128 characters)
   To Address 1	To address 1	XXXXXXXX (up to 128 characters)
   Reply Address 1	Reply address 1	XXXXXXXX (up to 128 characters)
   Notice Conditions 1	Notice conditions 1	-
   Job End	Job end	On/Off
   Error Occurred	Error occurred	On/Off
   Warning Occurred	Warning occurred	On/Off
   Signature 1	Signature 1	XXXXXXXX (up to 128 characters)
   To Address 2	To address 2	XXXXXXXX (up to 128 characters)
   Reply Address 2	Reply address 2	XXXXXXXX (up to 128 characters)
   Notice Conditions 2	Notice conditions 2	-
   Job End	Job end	On/Off
   Error Occurred	Error occurred	On/Off
   Warning Occurred	Warning occurred	On/Off
   Signature 2	Signature 2	XXXXXXXX (up to 128 characters)
   RUI Setting	RUI setting information	-
   Use RUI	Use Remote UI	On/Off

   ("XX" represents alphanumeric characters.)