Reconfiguration Method of LAN Connection/Reconfiguration Method of Wi-Fi Connection

For Windows:

• Redo setup from the web page.

• Select Enable for Enable/disable Wired LAN or Enable/disable Wi-Fi from LAN settings in the LCD menu.

  After that, perform settings on the Network Settings screen on IJ Network Device Setup Utility.

  For details, refer to Performing/Changing Wi-Fi Settings or Performing/Changing Wired LAN Connection (Ethernet Cable) Settings.

For macOS:

Redo setup from the web page.

For Windows:

• Refer to Changing the Connection Mode.

• Perform settings on the Network Settings screen on IJ Network Device Setup Utility.

  Important

  • Before you perform settings using IJ Network Device Setup Utility, change the printer settings following the procedure below.

    1. Check that printer is turned on.

    2. Select LAN settings on HOME screen and press the OK button.

       If you specify the administrator password, enter the password.

    3. Select Wi-Fi and press the OK button.

    4. Select Settings and press the OK button.

    5. Select Wi-Fi setup and press the OK button.

    6. Select Easy wireless connect and press the OK button.

    7. Check message and press the OK button.

       Follow instructions on your computer, smartphone or tablet.

    8. If message saying setup is completed appears, press the OK button.

For macOS:

Refer to Changing the Connection Mode.