skip to main text

Updating Printer Firmware

Important

  • Make sure the printer is connected to Internet before updating printer firmware.
  • If the firmware update is carried out, all faxes stored in the printer's memory are deleted.

  • You cannot start the firmware update under the following conditions:

    • While the printer is sending or receiving a fax
    • When the unsent faxes are stored in the printer's memory

Follow the procedure below.

Updating Printer Firmware from Operation Panel

  1. Make sure printer is turned on.

  2. Press Setup button.

    The Setup menu screen appears.

  3. Select Device settings and press OK button.

  4. Select Firmware update and press OK button.

  5. Select Install update and press OK button.

  6. Check displayed message and press OK button.

  7. Check displayed message and press OK button.

  8. Check displayed message, select Yes and then press OK button.

  9. Check displayed message and press OK button.

    Important

    • If faxes are stored in the printer's memory, a message appears. Check the displayed message and press the OK button to continue. Press the Stop button to cancel firmware update.

    Update starts.

    Finishing update turns off the printer and it turns on again.

  10. Check displayed message and press OK button.

Updating Printer Firmware from Remote UI

  1. Display printer status on web browser.

  2. Select Firmware update.

  3. Select Install update.

  4. Check displayed message and select Update.

    Important

    • If faxes are stored in the printer's memory, a message appears. Check the displayed message and select Yes to continue. Select No to cancel firmware update.

    Update starts and returns to the menu screen when update is completed.