skip to main text

WPS (PIN Code) Connection

  1. Load three sheets of A4 or Letter-sized plain paper.

  2. Press the Information button (A) on the printer.

    The Network Configuration Page including a PIN code will be printed.

    figure: Press the Information button

  3. Press and hold the RESUME button (B) on the printer until the Alarm lamp (C) flashes 7 times, and then release the RESUME button after the seventh flash.

    figure: Press and hold the RESUME button and the Alarm lamp flashes 7 times

  4. Follow the on-screen instructions on the device (such as a computer) to set the WPS PIN CODE described on the printed Network Configuration Page on the wireless router.

  5. When connection to the wireless router is complete, the Wireless lamp and Network lamp will be lit.

    figure: The Wireless lamp and Network lamp are lit

    If the Alarm lamp lights up, see "Troubleshooting."

The network connection setup is now complete.