Troubleshooting -WPS (PIN code)-

The Alarm Lamp Lights Up

Check the access point settings, then configure WPS (PIN code) settings again. The error also appears when wireless connection setup was not completed within 10 minutes after release the Stop button.

• Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back on.

Do not operate the screen of this guide until the power is on. The connection to the network device will be temporarily disabled.

• To configure WPS (PIN code) settings again, press the Color button and see hereGo to step 2 and proceed with the setup.

For details on how to check the security settings of the access point, refer to the manual supplied with the access point or contact its manufacturer.