skip to main text

Connection via Advanced setup

  1. Enter the access point name/network name (SSID).

    Character entry is case-sensitive so be sure to confirm.

    If you don't know your access point name, refer to the manual supplied with the access point or contact its manufacturer.

    (Appears in a new window)

    Access point name entry screen

  2. Press the OK button.

    Access point name entry screen

  3. Make sure that the access point name/network name (SSID) is correct.

  4. Press the OK button.

    Access point name confirmation screen

  5. Select the security protocol used by the access point, then press the OK button.

    If Connected to the access point. appears on the printer, the network does not require a password. Select "Disable" in the next step and proceed with the setup.

    Security settings screen

    If another screen appears, refer to "Troubleshooting."

  6. Select the security protocol set on the access point.