Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)

This section explains how to scan one side of the documents at a time. To scan both sides of the documents automatically, refer to "Scanning Both Sides of Each Document at One Time".

Note

• You can scan multiple documents at one time from the ADF when scanning via Document, Custom, Driver, OCR, or E-mail.
• The screens for scanning documents are used as examples in the following descriptions.

1. Place the documents on the ADF.

   For how to place documents, see the "Positioning Originals (Scanning from Computer)" page by searching for it from the top page of the Online Manual for your model.

2. Start IJ Scan Utility Lite.

3. Click Settings....

   

   The Settings dialog appears.

4. Click Document Scan.

   

5. Select Select Source according to the documents to be scanned.

   To scan only the front side of each document, select Document (ADF/Platen) or Document (ADF Simplex).

   To scan the front side then the back side of each document, select Document (ADF Manual Duplex).

   

6. Set the color mode, document size, and scanning resolution as required.

   Click Document Scan Orientation Settings... to specify the orientation of the documents to be scanned. In the displayed dialog, you can specify the Orientation and Binding Side. How to place the documents when scanning the back sides depends on the Binding Side.

   When setting is completed, click OK.

   

   The IJ Scan Utility Lite main screen appears.

   Important

   • When scanning from the ADF, documents may be scanned at a paper size different from the size specified in Paper Size.

   Note

   • Refer to the following pages for details on the setting items in the Settings dialog.

     • Settings (Document Scan) Dialog
     • Settings (Custom Scan) Dialog
     • Settings (OCR) Dialog
     • Settings (E-mail) Dialog

7. Click Document.

   

   Scanning starts.

   Note

   • To cancel the scan, click Cancel.

   When Document (ADF Manual Duplex) is selected for Select Source, proceed to Step 8.

   Note

   • When Document (ADF Auto Duplex) is selected for Select Source, the Manual Duplex Scanning dialog does not appear; both sides of the documents are scanned automatically. Refer to "Scanning Both Sides of Each Document at One Time" for details.

8. Follow the on-screen instructions to place the documents.

   Note

   • The screens for scanning with Orientation set to Portrait are used as examples in the following descriptions.

   When Long edge is Selected for Binding Side in Document Scan Orientation Settings...:

   Place the documents after rotating the output documents 180 degrees.

   

   When Short edge is Selected for Binding Side in Document Scan Orientation Settings...:

   Place the documents without changing the orientation of the output documents.

   

9. Click OK.

   Scanning starts.

Note

• To cancel the scan, click Cancel.
• Scanned images are saved in the folder set for Save in in the corresponding Settings dialog displayed by clicking Settings.... In each Settings dialog, you can also make advanced scan settings.