Aligning the Print Head

Adjust the position of the print head if colors are not aligned in printouts, etc.
Prepare the following paper.
Plain paper (recycled paper can be used)
Size: any of A3, 11x17, LTR, or A4
A3 or 11x17 is recommended.
Sheets: 1
Paper clean and white on both front and back
1
Load paper in a paper drawer or the multi-purpose tray.
Make paper settings also. Loading Paper
2
Select <Menu> in the Home screen. Home Screen
3
Select <Adjustment/Maintenance>  <Adjust Image Quality>.
4
Select <Print Head Alignment>.
5
Check that the size and type of paper displayed on the screen is loaded in the machine, and select <Next>.
6
Confirm the procedure, and select <Start>.
An adjustment image is printed.
7
Open the feeder after the screen displayed during printing disappears.
8
Place the adjustment image on the platen glass.
Place the adjustment image with the print side facing down and the mark in the upper left corner of the machine.
9
Gently close the feeder.
10
Select <Start Scanning>.
The placed adjustment image is scanned, and positioning is adjusted for the print head nozzles.
11
When a message appears notifying that adjustment is complete, open the feeder, and remove the adjustment image.
12
Gently close the feeder.
If <Could not perform correction.> is displayed
Is the paper displayed in step 5 loaded in the paper source?
Is the adjustment image placed on the platen glass with the print side facing down and the mark in the upper left corner of the machine?
2579-0HJ