skip to main text

Canon IJ Printer Assistant Tool Description

The Canon IJ Printer Assistant Tool allows you to perform printer maintenance or change the settings of the printer.

figure: Canon IJ Printer Assistant Tool
Cleaning
Performs print head Cleaning.
The print head Cleaning function allows you to clear up clogged print head nozzles.
Perform print head Cleaning if printing results are not satisfactory or if a specific color fails to print, even though there is enough ink.
Deep Cleaning
Performs Deep Cleaning.
Perform Deep Cleaning when two Cleaning attempts do not resolve the print head problem.

Note

  • Deep Cleaning consumes a larger amount of ink than Cleaning.
    Cleaning the print heads frequently will rapidly deplete your printer's ink supply. Perform Cleaning only when necessary.
Ink Group
When you click Cleaning or Deep Cleaning, the Ink Group window is displayed.
Selects the ink group that you want to clean the print head for.
Click Initial Check Items to display the items that you need to check before you perform Cleaning or Deep Cleaning.
Print Head Alignment
Print Head Alignment corrects the installation positions of the print head and improves misalignment of colors and lines.
Align the print head immediately after installing the print head.
When you click Print Head Alignment, the Print Head Alignment dialog box is displayed.
Nozzle Check
Prints a Nozzle Check pattern.
Perform this function if printing becomes faint or a specific color fails to print. Print a Nozzle Check pattern, and check whether the print head is working properly.
If the print result for a specific color is faint, or if there are any unprinted sections, click Cleaning to clean the print head.
To display a list of items that you should check before printing the Nozzle Check pattern, click Initial Check Items.
Print Check Pattern
This function prints a pattern that allows you to check whether the any of the ink nozzles are clogged.
Click Print Check Pattern. When the confirmation message is displayed, click OK. The Pattern Check dialog box is then displayed.
Left-side bitmap (good)
The print head nozzles are not clogged.
Right-side bitmap (bad)
The print head nozzles may be clogged.
Exit
Closes the Pattern Check dialog box.
Cleaning
Performs print head Cleaning.
Print head Cleaning removes any blockage in the print head nozzles.
Perform Cleaning when printing becomes faint, or if a specific color fails to print, even though all ink levels are sufficiently high.
Ink Flush
Performs Ink Flush.
Perform this function if the print results do not improve even after Deep Cleaning is performed.
Ink Flush consumes an extremely large amount of ink.
Performing Ink Flush frequently will rapidly deplete your printer's ink supply. Therefore perform Ink Flush only when necessary.

Important

  • If Ink Flush is performed when the remaining ink level is insufficient, it may cause a failure.
    Be sure to check the remaining ink level before performing Ink Flush.
Ink Group
When you click Ink Flush, the Ink Group window is displayed.
Select the ink group for which you want to perform Ink Flush.
Click Initial Check Items to display the items that you need to check before performing Ink Flush.
Remaining Ink Notification Settings
Displays the Remaining Ink Notification Settings dialog box.
Run this function to switch the remaining ink level notification setting and to reset the remaining ink level count.
Bottom Plate Cleaning
Performs cleaning of the bottom plate of the printer.
To prevent smudges on the back side of a sheet of paper, perform Bottom Plate Cleaning before you perform duplex printing.
Also perform Bottom Plate Cleaning if ink smudges caused by something other than print data appear on the printed page.
Roller Cleaning
Cleans the paper feed rollers.
Paper feed may fail if paper dust has stuck to the printer's paper feed rollers. In this case, clean the paper feed rollers to improve the print result.
Power Off
Turns off the printer from the Canon IJ Printer Assistant Tool.
Perform this function to turn off the printer when you cannot press the ON button (POWER button) on the printer because the printer is out of your reach.
You must press the ON button (POWER button) on the printer to turn the printer on again after clicking this button. When you use this function, you will not be able to turn the printer on from the Canon IJ Printer Assistant Tool.
Auto Power
Opens the Auto Power Settings dialog box.
Specify settings for operating the printer power automatically. Perform this function if you want to change the auto power settings.

Note

  • If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status.
    If this happens, click OK to display the most recent settings specified on your computer.
Quiet Settings
Opens the Quiet Settings dialog box.
Quiet Settings dialog box allows you to specify a setting that reduces the operating noise of the printer. This mode comes in handy when the operating noise of the printer becomes a concern, such when printing at night. Perform this operation when you want to change the quiet mode setting.

Note

  • If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status.
    If this happens, click OK to display the most recent settings specified on your computer.
Custom Settings
Opens the Custom Settings dialog box.
Perform this function to change the settings of this printer.

Note

  • If the printer is off or if communication between the printer and the computer is disabled, an error message may appear because the computer cannot collect the printer status.
    If this happens, click OK to display the most recent settings specified on your computer.
View Printer Status
Starts the Canon IJ Status Monitor.
Perform this function when you want to check the printer status and how a print job is proceeding.

Initial Check Items (Cleaning / Deep Cleaning)

Before running Cleaning or Deep Cleaning, check that the printer power is on.
Check the following:

Print Head Alignment dialog box

This dialog box allows you to adjust the attachment position for the print head, or to print the current setting value for the print head position.

Note

Start
Aligns the print head.
Print Head Alignment corrects the installation positions of the print head and improves misalignment of colors and lines.
Align the print head immediately after installing the print head.
Print Alignment Value
Click this button to check the current setting value of the print head position.
Prints the current setting value for the print head position.

Print Head Alignment dialog box (run time)

To adjust the print head position, click Start in the Print Head Alignment dialog box, and perform the operations instructed in the messages. The Print Head Alignment dialog box (run time) is then displayed.
This dialog box allows you to check the printed pattern and adjust the print head position.

Preview Window
Displays the pattern of Print Head Alignment, and checks the position of the selected pattern.
You can also change the setting by clicking the pattern on the screen directly.
Select the Pattern Number
Compare the printed adjustment patterns, and enter the pattern number of the pattern with the least prominent streaks or stripes into the corresponding box.

Note

Initial Check Items (Nozzle Check)

Before performing Nozzle Check, check that the printer power is on.
Check the following:

Initial Check Items (Ink Flush)

Before performing Ink Flush, check that the printer power is on.
Check the following:

  • Were there any parts where printing was faint or left unprinted after performing Nozzle Check?
  • Are the print results still unsatisfactory even after performing Deep Cleaning?
  • Is there enough remaining ink?
    • Perform a visual check to see if there is enough remaining ink.
      If Ink Flush is performed when the remaining ink level is insufficient, it may cause a failure.
    • If you select All Colors or Black in Ink Group, make sure that all remaining ink is above the position of the single dot indicated on the ink tanks. (Even if you select Black, color ink will be depleted.)
      If you select Color, make sure that all remaining ink of all colors is above the position of the single dot indicated on the ink tanks.
    • If the remaining ink is below the single dot position, refill the ink tank until it reaches the single dot position.

Remaining Ink Notification Settings dialog box

When you click Remaining Ink Notification Settings, the Remaining Ink Notification Settings dialog box appears.
From the Canon IJ Printer Assistant Tool, you can switch the remaining ink level notification setting and reset the remaining ink level count.

Function for Notifying the Remaining Ink Level
Select the setting for the remaining ink level notification function.
Select Enable to display an error message when the remaining ink level runs low.
Select Disable to prevent the error message from being displayed.
Then click Set to apply the selected setting.

Important

  • Before enabling Function for Notifying the Remaining Ink Level, replenish all inks to the upper limit line and reset the remaining ink level count by running Resets the Remaining Ink Level Count. However, if you reset the count by operating the operation panel of the printer, the setting in the Canon IJ Printer Assistant Tool is unnecessary.
    If any ink is not replenished to the upper limit line, a significant error may occur in the accuracy of the remaining ink level notification function.
  • If you disable Function for Notifying the Remaining Ink Level, you must visually check the remaining ink level. Replenish the ink before the ink level falls below the lower limit line.
Resets the Remaining Ink Level Count
Select the ink color and click Reset to reset the remaining ink level count.

Important

  • When you reset the remaining ink level count, you must replenish the ink to the upper limit line.

Auto Power Settings dialog box

When you click Auto Power, the Auto Power Settings dialog box is displayed.
This dialog box allows you to manage the printer power from the Canon IJ Printer Assistant Tool.

Auto Power On
Selects the auto power-on setting.
Specify Disable to prevent the printer from turning on automatically when print data is sent to it.
Check that the printer is on and then click OK to change the printer settings.
Specify Enable to turn the printer on automatically when print data is sent to it.
Auto Power Off
Select the time that you want to set from the list. If a printer driver operation or a printer operation is not performed within the selected time, the printer turns off.

Quiet Settings dialog box

When you click Quiet Settings, the Quiet Settings dialog box is displayed.
Quiet Settings dialog box allows you to specify a setting that reduces the operating noise of the printer.
Select when you wish to reduce the operating noise of the printer at night, etc.
Using this function may lower the print speed.

Do not use quiet mode
Select this option when you wish to use the printer with volume of normal operating noise.
Always use quiet mode
Select this option when you wish to reduce the operating noise of the printer.
Use quiet mode during specified hours
Select this option when you wish to reduce the operating noise of the printer during a specified period of time.
Set the Start time and the End time of the quiet mode you wish to be activated. If both are set to the same time, the quiet mode will not function.

Important

  • The quiet mode is applied when you perform operations from the printer or printing from the computer.
  • Quiet Mode is not applied to operations (direct print, etc.) performed directly from the printer even during times set for Use quiet mode during specified hours.

Custom Settings dialog box

When you click Custom Settings, the Custom Settings dialog box is displayed.
If necessary, switch between various modes of printer operation.

Prevents paper abrasion
The printer can increase the gap between the print head and the paper during high-density printing to prevents paper abrasion.
Check this check box to prevent paper abrasion.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation.
To rotate the print data 90 degrees to the left during printing, select this item. To rotate the print data 90 degrees to the right during printing, clear this item.

Important

  • Do not change this setting while the print job is displayed in the print wait list. Otherwise, characters may be omitted or the layout may become corrupt.
Do not detect mismatched paper settings when printing from a computer
When printing documents from your computer, the paper loaded in the printer and the paper size setting on the printer driver do not match, this setting disables the message display and allows you to continue printing.
To disable detection of paper setting mismatches, select this check box.
Ink Drying Wait Time
You can set the length of the printer rest time until printing of the next page begins. Moving the slider to the right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.