Digital Printing Workflow Color Management Basics Utilizing Print Studio Pro
Techniques for Specific Objectives Useful Information
DP003W

2. Developing/Correcting Images on the Monitor

Develop/correct images using image editing software to make them closer to what you want while viewing the images on the monitor.

Preparation

It is recommended that you use a color-managed monitor.
Set the monitor as follows.

For ambient lighting, it is recommended that you use D50 fluorescent lamps designed for color evaluation (color temperature: 5000 K, high color rendering properties).

Refer to "Lesson 2 Color Management Basics" for details on color management.

Tip

When the Values Above Cannot Be Set on the Monitor

Color tones will differ between the monitor and printed materials; print before making any correction, then apply correction while viewing the printed material.

Steps

The following describes the steps for developing RAW format data. Although some image editing software may be able to correct even JPEG format data, the image quality will be lower than RAW format data since JPEG format data is compressed. Therefore, applying correction may degrade gradations and other elements.

  1. Start the image editing software to be used.
  2. Open the image you want to print.
  3. Note

    The settings of the image editing software will be applied to the image's color space. Change the color space according to the file format of the image to be used and purpose of use.

  4. Develop/correct the photo to make it closer to what you want.

Page top