Adjusting the Color Balance, Brightness and Contrast

Important

• The color balance, brightness and contrast adjustments apply to all the images to be printed. To adjust each image individually, it is recommended that you use image editing software.
• The results of adjustments in Print Studio Pro will only be reflected in the printed materials and not in the image data.

1. Make sure images you want to print are displayed in Thumbnails area at bottom of screen.

2. On Correction tab, adjust Brightness and Contrast.

   

   Important

   • If the result of printing after adjusting the brightness/contrast is different from what is displayed in print preview, perform Pattern Print and adjust the color again, using the pattern as a reference.

     • Adjusting the Brightness/Contrast by Looking at Patterns (Print Studio Pro)

   Note

   • For Brightness, move the slider to the right to brighten and left to darken.
   • For Contrast, move the slider to the right to increase and left to decrease the contrast.
   • You can also set by entering a value directly into the text input box.

3. Adjust Color Balance.

   

   Important

   • The color balance cannot be set if Black and White Photo is selected for Color Mode in Color Management on the Print Settings tab. If you select Black and White Photo after changing the color balance, the changed color balance will be discarded.

   • If the result of printing after adjusting the color balance is different from what is displayed in print preview, perform Pattern Print and adjust the color again, using the pattern as a reference.

     • Adjusting the Color Balance by Looking at Patterns (Print Studio Pro)

   Note

   • Move the slider to the right to emphasize and left to weaken the color tone.
   • You can also set by entering a value directly into the text input box.