Changing the Settings in the Wireless LAN Sheet

To change the wireless network settings of the printer, connect the printer and the computer with a USB cable temporarily. If you modify the wireless network settings of the computer over wireless connection without USB connection, your computer may not be able to communicate with the machine after modifying the settings.

Note

This screen is not available depending on the printer you are using.
Enable the wireless LAN setting of the printer to change the settings in the Wireless LAN sheet.

Start up IJ Network Tool.
Select the printer in Printers:.

When the printer is connected to the computer with a USB cable temporarily, select the printer with USB appearing in the Connected to column.
Click the Configuration... button.
Click the Wireless LAN button.
Change the settings or confirm.

Click OK after changing configuration. A screen is displayed asking you for confirmation before the settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted Settings screen is displayed.
1. Network Type:
  
  Displays the wireless LAN mode currently selected.
  AirPort Network (Infra)
  
  Connects the printer to the wireless LAN with a wireless router.
  
  Access point mode
  
  Connects external wireless communication devices (e.g. computers, smartphones, or tablets) to the printer using it as an access point (wireless router).
  
  Note
  - When Access point mode is displayed on Network Type:, you cannot change the settings on the Wireless LAN sheet or the Admin Password sheet.
  - You can perform setting from Set up printer's access point mode... on the Settings menu when you use the printer with the access point mode.
    
    Depending on the printer you are using, you can change the settings using the operation panel.
2. Network (SSID):
  
  The network name (SSID) of the wireless LAN currently used is displayed.
  
  In the access point mode, the access point name (SSID) of the printer is displayed.
  
  Note
  - Enter the same SSID that the wireless router is configured to use. The SSID is case-sensitive.
3. Search...
  
  The Wireless Routers screen is displayed to select a wireless router to connect to.
  
  Wireless Routers Screen
  
  Note
  - When IJ Network Tool runs over a LAN, the button is grayed out and cannot be selected. Connect the printer and the computer with a USB cable temporarily to change the settings.
4. Encryption Method:
  
  Select the encryption method used over the wireless LAN.
  
  Important
  - If all encryption types of the wireless router, printer, or computer do not match, the printer cannot communicate with the computer. If the printer cannot communicate with the computer after the encryption type of the printer was switched, make sure that encryption types for the computer and the wireless router match that set to the printer.
  - If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.
  Do Not Use
  
  Select to disable encryption.
  
  Use Password (WEP)
  
  Transmission is encrypted using a WEP key you specified.
  
  If a network password (WEP) has not been set, the WEP Details screen is displayed automatically. To change WEP settings set before, click Configuration... to display the screen.
  
  Changing the WEP Detailed Settings
  
  Use WPA/WPA2
  
  Transmission is encrypted using a network key you specified.
  
  The security has been strengthened more than WEP.
  
  If a network key has not been set, the Authentication Type Confirmation screen is displayed automatically. To change network key settings before, click Configuration... to display the WPA/WPA2 Details screen.
  
  Changing the WPA/WPA2 Detailed Settings
5. Configuration...
  
  The detailed settings screen is displayed. The network password (WEP) or the WPA/WPA2 key selected in Encryption Method: can be confirmed and changed.
  
  For details on WEP setting:
  
  Changing the WEP Detailed Settings
  
  For details on WPA/WPA2 setting:
  
  Changing the WPA/WPA2 Detailed Settings
6. TCP/IP Setting:
  
  Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your network environment.
  
  Get IP address automatically
  
  Select this option to use an IP address automatically assigned by a DHCP server. DHCP server functionality must be enabled on your wireless router.
  
  Use following IP address
  
  Select this option if no DHCP server functionality is available in your setup where you use the printer, or you want to use a particular IP address or a fixed IP address.

Wireless Routers Screen
1. Detected Wireless Routers:
  
  The signal strength from the wireless router, encryption type, name of wireless router, and the radio channel can be confirmed.
  
  Important
  - If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party.
  Note
  - Signal strength is displayed as follows.
    
    : Good
    
    : Fair
    
    : Poor
  - Type of encryption is displayed as follows.
    
    Blank: No encryption
    
    WEP: WEP is set
    
    WPA/WPA2: WPA/WPA2 is set
2. Refresh
  
  Click to update the list of wireless routers when your target wireless router is not detected.
  
  If the target wireless router is set to a closed network (the stealth mode), click Cancel to return to the previous screen and enter the network name (SSID) in Network (SSID).
  
  Note
  - Make sure that the wireless router is turned on.
3. Set
  
  Click to set the network name (SSID) in Network (SSID): on the Wireless LAN sheet.
  
  Note
  - The WPA/WPA2 Details screen or the WEP Details screen appears if the selected wireless router is encrypted. In this case, configure the details to use the same encryption settings set to the wireless router.
  - Wireless routers that cannot be used by this machine (including those configured to use different encryption methods) are displayed grayed out and cannot be configured.