Disc Label Printing Does Not Start
Disc Tray Does Not Feed Properly
Check 1: Is the disc tray placed properly?
Open the inner cover (the cover of the disc tray), properly place the disc tray again, then press the RESUME/CANCEL button on the printer.
Use the disc tray supplied with this printer ("H" is on the upper side).
For details on how to place the disc tray, refer to Placing a Printable Disc.
Check 2: Is the printable disc placed on the disc tray?
Place the printable disc on the disc tray properly, then press the RESUME/CANCEL button.
Use the disc tray supplied with this printer ("H" is on the upper side).
For details on how to place the disc tray, refer to Placing a Printable Disc.
Check 3: If disc label printing stops before it is complete, try the operation again.
If a certain period of time has elapsed while disc label printing is in progress, the printer stops initializing.
The printer resumes initializing by pressing the RESUME/CANCEL button.
Try the operation again following the on-screen instructions.
Check 1: Is the disc tray placed properly?
Properly place the disc tray again, then press the RESUME/CANCEL button.
Make sure that you are using the disc tray supplied with the printer ("H" is on the upper side).
For details on how to place the disc tray, refer to Placing a Printable Disc.
Check 2: Unrecognizable printable disc may be placed.
Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer.
Pull out the disc tray gently.
If the disc tray cannot be pulled out, turn the printer off, then turn the printer back on again. The disc tray will automatically be ejected.
When the disc tray is pulled out, place the disc tray ("H" is on the upper side) again, then retry printing. Place the printable disc properly referring to Placing a Printable Disc.
If the disc tray is still jammed, check if there is a problem with the printable disc.
Page top |
