This machine allows you to prepare for sending the same document to a maximum of 101 recipients in one operation. The recipients can be specified with the Numeric buttons, coded speed dial, and group dial in combination.
The following number of recipients can be specified in combination.
The recipient registered to the machine:
Up to 100 (total of coded speed dial and group dial)
Dialing using the Numeric buttons or redialing:
1
ImportantIt may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, it is recommended that you send them one by one after speaking on the telephone.
NoteIf you frequently send documents to the same group of recipients, you can group these numbers for group dialing. This will allow you to send documents to all the recipients in the group by simply pressing a few buttons.
For details on the basic sending operations:
Make sure that the machine is turned on.
Press the FAX button.
The Fax standby screen is displayed.
Load documents on the platen glass or in the ADF.
Adjust the scan contrast and resolution as necessary.
NoteFor details on how to adjust the scan contrast and resolution, see Sending Faxes with the Numeric Buttons.
Specify all recipients' fax/telephone numbers one by one.
Before finishing specifying all recipients' fax/telephone numbers, do not press the Color button or the Black button.
By specifying with the recipient registered to the machine (coded speed dial or group dial):
Press the Coded Dial button, select a recipient, then press the OK button.
By dialing using the Numeric buttons:
Use the Numeric buttons to enter the recipient's fax/telephone number, then press the left Function button.
NoteIf FAX number re-entry in Security control under FAX settings is set to ON, use the Numeric buttons again to enter the number.
By redialing:
Press the Redial/Pause button, use the 
button to select the number you want to dial, then press the OK button.
The Sequential broadcasting screen is displayed after specifying the multiple recipients.
NoteYou can review the numbers you have entered by pressing the button on the Sequential broadcasting screen.
Pressing the Back button allows you to delete the recipient's number you entered last.
Press the Color button for color transmission, or the Black button for black & white transmission.
ImportantColor transmission is available only when the recipient's fax machine supports color faxing.
NoteTo cancel sequential broadcasting, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, then follow the instructions on the LCD.
If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Document in ADF. Select 
to eject document. is displayed on the LCD. By pressing the OK button, the remaining documents are automatically ejected.
When you press the Stop button, fax transmission to all the recipients specified will be canceled. You cannot cancel a fax transmission to only one recipient.
Page top |
