WLAN activ./inactiv.
Activates/deactivates wireless LAN.
Wireless LAN setup
If your access point is compatible with WPS, set up wireless LAN following the on-screen instructions. If not, select one of the setup methods below.
Standard setup
Select when you perform settings for wireless LAN manually using the operation panel of the machine.
WPS
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select Push button method or PIN code method according to the method your access point supports, then follow the on-screen instructions.
Other setup
Select Manual setup, then follow the on-screen instructions.
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out, refer to Printing Out Network Setting Information.
ImportantThis printout contains valuable information about your computer. Handle it with care.
Other settings
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
NoteYou cannot use the same printer name as that already used for other LAN connected devices.
You cannot use a hyphen for the initial or last character of the printer name.
TCP/IP settings
Performs IPv4 or IPv6 setting.
WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 7 and Windows Vista).
Selects whether WSD is enabled or disabled.
NoteWhen this setting is activated, the printer icon is displayed on the Network Explorer in Windows 7 and Windows Vista.
Selecting Active allows you to transfer the scanned data to the computer using WSD.
Specifies the timeout length.
Bonjour settings
Setting items for LAN using Bonjour for Mac OS.
Selecting Active allows you to use Bonjour to perform the network settings.
Specifies the Bonjour service name. You can use up to 48 characters for the name.
NoteYou cannot use the same service name as that already used for other LAN connected devices.
LPR setting
Activates/deactivates the LPR setting.
DRX setting
Selecting Active allows you to activate discontinuous reception when using wireless LAN. It allows you to save electricity.
NoteDepending on the access point you are using, discontinuous reception may not be activated even though Active is selected.
Discontinuous reception is activated only while the machine is on standby. (The LCD is in the screen saver mode.)
Reset LAN settings
Initializes the network settings on the machine.
ImportantNote that initialization erases all connection settings with computers, and printing or scanning operation may become impossible. To use the machine over network, perform setup with the Setup CD-ROM. Be careful when you initialize the network settings on the machine.
NoteWhen you initialize the network settings using IJ Network Tool:
Page top |
