skip to main text

Changing the Machine Settings on the LCD

This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example.

  1. Make sure that the machine is turned on.

  2. Select Setup on the HOME screen.

    LCD and Operation Panel

  3. Select Device settings, then press the OK button.

    The Device settings screen is displayed.

  4. Use the UPDOWN button to select the setting item, then press the OK button.

    figure: LCD

    The setting screen for the selected item is displayed.

  5. Use the UPDOWN button to select the menu, then press the OK button.

    figure: LCD
  6. Use the UPDOWN button to select the setting item, then press the OK button.

    figure: LCD

You can select the setting menus below.

Print settings

LAN settings

Device user settings

PictBridge print settings

Language selection

Firmware update

Cassette settings

Reset setting

Note

  • You can use the machine considering the environment, such as setting 2-sided printing as default or enabling the machine to turn on/off automatically.

    About ECO settings

  • You can reduce the operating noise when printing at night.

    About Quiet setting