Two-Sided Copying
When you select 2-sided for 2-sidedPrintSetting in Copy, you can copy two original pages onto the both sides of a single sheet of paper.
In addition, when you select Duplex for ADF duplex scan, you can perform duplex scanning.
Specify the place to load originals or copy settings according to the two-sided copying method.
-
Single-sided to Two-sided
Place to load the original: platen glass or ADF
ADF duplex scan: Simplex
2-sidedPrintSetting: 2-sided
Note
-
When you tap Advanced, after tapping 2-sided for 2-sidedPrintSetting, you can select the orientation and the stapling side of the paper. Also, you can select whether to display the preview screen when you load the original on the platen glass.
-
When you select Orientation: Portrait and Output: Long side bind:
-
When you select Orientation: Portrait and Output: Short side bind:
-
When you select Orientation: Landscape and Output: Long side bind:
-
When you select Orientation: Landscape and Output: Short side bind:
-
-
Two-sided to Single-sided
Place to load the original: ADF
ADF duplex scan: Duplex
2-sidedPrintSetting: 1-sided
Note
-
When you tap Advanced after tapping Duplex for ADF duplex scan, you can select the orientation and the stapling side of the original.
-
When you select Orientation: Portrait and Output: Long side bind:
-
When you select Orientation: Portrait and Output: Short side bind:
-
When you select Orientation: Landscape and Output: Long side bind:
-
When you select Orientation: Landscape and Output: Short side bind:
-
-
Two-sided to Two-sided
Place to load the original: ADF
ADF duplex scan: Duplex
2-sidedPrintSetting: 2-sided
Note
-
When you select Duplex for ADF duplex scan and tap Advanced, you can select the orientation and the stapling side of the original. When you select 2-sided for 2-sidedPrintSetting and tap Advanced, you can select the orientation and the stapling side of the paper.
-
When you select Orientation: Portrait for the orientation and Original: Long side bind and Output: Long side bind for the stapling side:
-
When you select Orientation: Portrait for the orientation and Original: Short side bind and Output: Short side bind for the stapling side:
-
When you select Orientation: Landscape for the orientation and Original: Long side bind and Output: Long side bind for the stapling side:
-
When you select Orientation: Landscape for the orientation and Original: Short side bind and Output: Short side bind for the stapling side:
When the stapling sides specified for Duplex and 2-sided are different, the originals are copied so that the page is flipped vertically.
Ex: When you select Orientation: Landscape, Original: Long side bind, and Output: Short side bind:
-
After selecting the stapling side, you can select whether you use the preview screen. If you tap ON, the preview screen is displayed so that you can check the orientation.
Note
-
Two-sided copy setting can be used in combination with 2-on-1 copy or 4-on-1 copy.
-
If you are copying in black & white, print intensity of the Two-sided copy may differ from that of a single-sided copy.
When Loading the Original on the platen glass:
-
Before scanning:
When you select 2-sided for 2-sidedPrintSetting and the preview function is activated, the machine starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below (preview screen) is displayed on the LCD.
-
Tap to rotate the original by 180 degrees.
-
Tap to start scanning the original.
-
Tap to rescan the original.
-
-
After scanning:
The screen below appears after scanning each sheet of original.
-
Tap to start scanning the original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the platen glass, then tap Scan.
-
Tap to start copying the original already scanned.
Note
-
You can add the copying job while printing.
-