Setting the Sender Information

About the Sender Information

If the unit name and unit fax/telephone number are registered, they are printed with date and time as sender information on the recipient's fax.

1. Date and time of transmission

2. Unit fax/telephone number

3. Unit name

4. The registered recipient's name is printed when sending faxes.

5. Page number

Note

• You can print USER'S DATA LIST to confirm the sender information you have registered.

  Summary of Reports and Lists

• When sending faxes in black & white, you can select whether to print the sender information inside or outside the image area.

  Specify the setting on TTI position in Advanced FAX settings under FAX settings.

  Advanced FAX settings

• You can select the date print format from three formats: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.

  Select the date print format on Date display format under Device user settings.

  Device user settings

Setting the Date and Time

This section describes the procedure to set the date and time.

1. Make sure that the machine is turned on.

2. Flick the HOME screen, then tap Setup.

   Using the Operation Panel

3. Tap Device settings.

4. Tap Device user settings.

5. Tap Date/time setting.

6. Set the date.

   1. Tap a setting item to change.

      

   2. Tap the number to enter.

      

      Enter only the last two digits of the year.

   3. Tap OK.

   4. Tap OK again when all settings are completed.

7. Set the time.

   1. Tap a setting item to change.

      

   2. Tap the number to enter.

      

      Enter the date and time in 24-hour format.

   3. Tap OK.

   4. Tap OK again when all settings are completed.

8. Press the HOME button to return to the HOME screen.

Setting Daylight Saving Time (Summer Time)

Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year.

You can set your machine to automatically change the time by registering the date and time that daylight saving time (summer time) begins and ends.

Important

• Not all the latest information of all countries or regions is applied for Daylight saving time setting by default. You need to change the default setting according to the latest information of your country or region.

Note

• This setting may not be available depending on the country or region of purchase.

1. Make sure that the machine is turned on.

2. Flick the HOME screen, then tap Setup.

   Using the Operation Panel

3. Tap Device settings.

4. Tap Device user settings.

5. Tap Daylight saving time setting.

6. Tap ON.

   To disable summer time, tap OFF.

7. Set the date and time when summer time starts.

   1. Set the date when summer time starts.

      Tap a setting item to change then specify the setting. Tap OK again when all settings are completed.

      

   2. Set the time (in 24-hour format) when summer time starts.

      Tap a setting item to change then specify the setting. Tap OK again when all settings are completed.

      

8. Set the date and time when summer time ends.

   1. Set the date when summer time ends.

      Tap a setting item to change then specify the setting. Tap OK again when all settings are completed.

      

   2. Set the time (in 24-hour format) when summer time ends.

      Tap a setting item to change then specify the setting. Tap OK again when all settings are completed.

      

9. Press the HOME button to return to the HOME screen.

Registering User Information

This section describes the procedure to register the user information.

Note

• Before sending a fax, be sure to enter your name and fax/telephone number in Unit name and Unit TEL on the User information settings screen (for US only).

1. Make sure that the machine is turned on.

2. Flick the HOME screen, then tap Setup.

   Using the Operation Panel

3. Tap Device settings.

4. Tap FAX settings.

5. Tap FAX user settings.

6. Tap User information settings.

   The screen to register the unit name and the unit fax/telephone number is displayed.

   

7. Enter the unit name.

   1. Tap the entry field under Unit name.

      The screen to enter the character is displayed.

   2. Enter the unit name.

      

   3. Tap OK.

   Note

   • You can enter the name up to 24 characters, including spaces.

   • For details on how to enter or delete characters:

     Entering Numbers, Letters, and Symbols

8. Enter the unit fax/telephone number.

   1. Tap the entry field under Unit TEL.

      The screen to enter the number is displayed.

   2. Enter the unit fax/telephone number.

      

   3. Tap OK.

   Note

   • You can enter the fax/telephone number up to 20 digits, including spaces.

   • For details on how to enter or delete characters:

     Entering Numbers, Letters, and Symbols

9. Tap Register to finalize registration.