Copying Two Pages to Fit onto a Single Page

You can copy two original pages or a two sided page onto a single sheet of paper by reducing each image.

1. Make sure that the machine is turned on.

2. Load paper.

3. Press the COPY button.

   The Copy standby screen is displayed.

4. Press the Menu button.

   The Copy menu screen is displayed.

5. Use the button to select Special copy, then press the OK button.

6. Use the button to select 2-on-1 copy, then press the OK button.

   If a page size setting or a media type setting that cannot be used in 2-on-1 copying is selected, the LCD displays the following message.

   

   1. Use the button to select the page size, then press the OK button.

   2. Use the button to select the media type, then press the OK button.

7. Load the original document on the platen glass or in the ADF.

8. Use the (-) (+) button or the Numeric buttons to specify the number of copies.

   Change the print settings as necessary.

   Setting Items for Copying

9. Press the Color button for color copying, or the Black button for black & white copying.

   • When the document has been loaded on the platen glass:

     When the machine finishes scanning the first page, the message below is displayed.

     

     If you have the next page to scan, load it on the platen glass and press the OK button. The machine starts copying.

     If you do not need more scanning, press the tone button to start copying. The machine starts copying.

     Note

     • You can add the copying job while printing.

       Adding the Copying Job (Reserve copy)

   • When the document has been loaded in the ADF:

     The machine starts scanning the next sheet of document automatically after one sheet of document finishes being scanned.

Note

• If Memory is full appears on the LCD when scanning, set the image quality to Standard or reduce the number of sheets of documents, then try copying again. If the problem is not resolved, set the image quality to Draft and try copying again.