skip to main text

Front View

(1) operation panel

Use to change the settings of the machine or to operate it.

(2) ADF (Auto Document Feeder)

Load a document here. The documents loaded in the document tray are scanned automatically one sheet at a time.

(3) document feeder cover
Open when clearing jammed documents.
(4) document guides
Adjust these guides to match the width of document in the ADF.
(5) document tray
Open to load a document in the ADF. You can load two or more sheets of document of the same size and thickness. Load the document with the side you want to scan facing up.
(6) document output slot
Documents scanned from the ADF are delivered here.
(7) document cover
Open to load an original on the platen glass.
(8) Wi-Fi lamp

Lights or flashes blue to indicate the wireless LAN status.

Lights:
Wireless LAN active is selected.
Flashes:
Printing or scanning over wireless LAN. Also flashes while configuring the wireless LAN connection.
(9) paper output cover
Open to replace the FINE cartridge or remove jammed paper inside the machine.
(10) paper guides
Align with both sides of the paper stack.
(11) front tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.

(12) front cover
Open to load paper in the front tray.
(13) paper support
Extend to load paper in the front tray.
(14) output tray extension
Open to support ejected paper.
(15) paper output support
Extend to support ejected paper.
(16) paper output tray
Printed paper is ejected.
(17) platen glass
Load an original here.