Operation Panel

* All lamps on the operation panel are shown lit in the illustration below for explanatory purposes.

(1) ON button

Turns the power on or off. Before turning on the power, make sure that the document cover is closed.

Turning the Machine On and Off

(2) ON lamp

Lights green after flashing when the power is turned on.

Note ON and Alarm lamps  You can check the status of the machine by the ON and Alarm lamps. – ON lamp is off: The power is off. – ON lamp lights green: The machine is ready to print. – ON lamp flashes green: The machine is getting ready to print, or printing is in progress. – Alarm lamp flashes orange: An error has occurred and the machine is not ready to print. "Support Code Corresponding to the Number of Flashes of the Alarm Lamp" in If an Error Occurs – ON lamp flashes green and Alarm lamp flashes orange alternately: An error that requires contacting the service center may have occurred. "Support Code Corresponding to the Number of Alternate Flashes of the ON Lamp and the Alarm Lamp" in If an Error Occurs

(3) Alarm lamp

Lights or flashes orange when an error occurs, such as paper-out or ink-out. When performing machine maintenance or machine settings, options can be selected according to the number of flashes.

(4) ink lamps

Light or flash orange when ink runs out, etc.

The upper lamp indicates the black FINE cartridge status, the lower lamp the color FINE cartridge status.

(5) Stop button

Cancels operations. You can press this button to cancel a print, copy, or scan job in progress. Holding this button down lets you select maintenance options or machine settings.

(6) Black button*

Starts black & white copying. You can also press this button to finalize your selection for the setting item.

(7) Color button*

Starts color copying. You can also press this button to finalize your selection for the setting item.

* In the software applications or manuals, the Color and Black buttons are collectively called the "Start" or "OK" button.