Setting the Receive Mode

Set the receiving operation (receiving mode).

For details on how to set the receive mode:

You can select the appropriate mode.

For details on the selectable receive mode:

About the Receive Mode

For details on the advanced settings of the receive mode:

Advanced Settings of Receive Mode

Note

The receiving operation procedure varies depending on the selected receive mode.

For details on receiving method depending on each receive mode:

Receiving Faxes
If you want to use a single telephone line for faxes and voice calls, you need to connect a telephone or an answering machine to the external device jack of this machine.

For details on how to connect the telephone or the answering machine to the machine:

Basic Connection

Setting the Receive Mode

This section describes the procedure to select the receive mode.

Make sure that the machine is turned on.
Flick the HOME screen, then tap FAX.

Using the Operation Panel
Tap Function list.

The Function list screen is displayed.
Tap Receive mode settings.
Tap a receive mode, then tap OK.

Note
- By tapping Advanced, you can specify the advanced settings of each receive mode.
  
  For details on the advanced settings of the receive mode:
  
  Advanced Settings of Receive Mode
- For details on the receive mode:
  
  About the Receive Mode
- DRPD is available only in the US and Canada.
- Network switch may not be available depending on the country or region of purchase.
- Refer to Receiving Faxes for information on receiving faxes or the procedure for each receive mode.

About the Receive Mode

You can select the receive mode suitable for your fax use conditions: whether you use a dedicated line for fax, etc.

Receive mode	Your fax use condition	Receiving operation
TEL priority mode	When mainly receiving voice calls (with a telephone or answering machine connected to the machine):	When a call incomes, the telephone will ring. Pick up the handset. If the call is a voice call, talk on the telephone. If the call is a fax, hang up the handset after the machine starts receiving the fax. Note The telephone may not ring when a call incomes even if it is connected to the machine, depending on the type or settings of the telephone.
DRPD or Network switch	When receiving voice calls (with a telephone or answering machine connected to the machine) and subscribing to a ring pattern detection service provided by your telephone company:	When a call incomes, the telephone will ring. The machine detects a fax call by the fax ring pattern. If the call is a fax, the machine will receive the fax automatically. If the machine does not detect the fax ring pattern, the telephone will continue ringing. Note The telephone may not ring when a call incomes even if it is connected to the machine, depending on the type or settings of the telephone.
FAX only mode	When not receiving voice calls:	When a fax incomes, the machine will receive the fax automatically.

Receive mode

Your fax use condition

Receiving operation

TEL priority mode

When mainly receiving voice calls (with a telephone or answering machine connected to the machine):

When a call incomes, the telephone will ring.

Pick up the handset.

If the call is a voice call, talk on the telephone.

If the call is a fax, hang up the handset after the machine starts receiving the fax.

Note

The telephone may not ring when a call incomes even if it is connected to the machine, depending on the type or settings of the telephone.

DRPD or Network switch

When receiving voice calls (with a telephone or answering machine connected to the machine) and subscribing to a ring pattern detection service provided by your telephone company:

When a call incomes, the telephone will ring. The machine detects a fax call by the fax ring pattern.

If the call is a fax, the machine will receive the fax automatically.

If the machine does not detect the fax ring pattern, the telephone will continue ringing.

Note

The telephone may not ring when a call incomes even if it is connected to the machine, depending on the type or settings of the telephone.

FAX only mode

When not receiving voice calls:

When a fax incomes, the machine will receive the fax automatically.

Advanced Settings of Receive Mode

You can specify the advanced settings of each receive mode.

Advanced setting in TEL priority mode

You can specify the following setting items.
- Manual/auto switch: ON/Manual/auto switch: OFF
  
  If you select Manual/auto switch: ON, the machine automatically receives faxes after the external device rang a specified length of time.
  
  You can specify the length of time until automatic reception is started.
- RX start time
  
  You can specify the length of time until automatic reception is started when Manual/auto switch: ON is selected. Specify the length of time and tap OK.
- User-friendly RX: ON/User-friendly RX: OFF
  
  If you select User-friendly RX: ON, the machine automatically switches from telephone calling to fax reception by detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering machine answers. When you have an answering machine connected to the machine, select User-friendly RX: ON to switch to fax reception automatically after the answering machine answers.
  
  If you select User-friendly RX: OFF, the machine does not switch from telephone calling to fax reception automatically even if the machine detects the fax signal (CNG signal). Select User-friendly RX: OFF if you want the machine not to switch automatically during a call.
Note
- If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device rings specified with Ring count in FAX only mode is available in TEL priority mode.
  
  If you want to specify the number of times the external device rings in TEL priority mode, select FAX only mode on the Receive mode settings screen, specify the number of times the external device rings with Ring count, then switch to TEL priority mode in Receive mode settings.
- If you subscribe to Duplex Ringing service in Hong Kong, we recommend that you select Manual/auto switch: OFF.
Advanced setting in FAX only mode

You can specify the following setting item.
- Ring count
  
  You can specify the number of times the external device rings when incoming.
  
  Specify the number of time and tap OK.
Advanced setting in DRPD

You can specify the following setting items.
- Ring pattern (Normal ring/Double ring/Short-short-long/Short-long-short)
  
  Sets the distinctive ring pattern of a call that the machine assumes is a fax call.
  
  If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your telephone company.
  
  Setting the DRPD Ring Pattern (US and Canada only)
- Ring count
  
  You can specify the number of times the external device rings when incoming.
  
  Specify the number of time and tap OK.
Advanced setting in Network switch

You can specify the following setting item.
- Ring count
  
  You can specify the number of times the external device rings when incoming.
  
  Specify the number of time and tap OK.

Setting the DRPD Ring Pattern (US and Canada only)

If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephone company, your telephone company will assign two or more telephone numbers with distinctive ring patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls using only one telephone line. Your machine will automatically monitor the ring pattern, and will automatically receive the fax if the ring pattern is a fax call.

To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern assigned by your telephone company.

Note

Contact your local telephone company for detailed information on this service.

Make sure that the machine is turned on.
Flick the HOME screen, then tap FAX.

Using the Operation Panel
Tap Function list.

The Function list screen is displayed.
Tap Receive mode settings.
Tap DRPD.
Tap Advanced.
Select the ring pattern that your telephone company assigned to your fax number.
Specify the number of time and tap OK.
Tap OK.

The Function list screen is displayed.